User Manual

11
Appendix
Eect Variation List
Eect button (hold down) +
scene memory button
Eect variation
[ROBOT]
[1] NORMAL
[2] OCTAVE -1
[3] OCTAVE +1
[4] FEEDBACK
[MEGAPHONE]
[1] MEGAPHONE
[2] RADIO
[3] BBD CHORUS
[4] STROBO
[VOCODER]
[1] ADVANCED
[2] VP
[3] TALK BOX
[4] SPELL TOY
[HARMONY]
[1] +5
[2] +3
[3] +3, -4
[4] +3, +5
[BYPASS] (reverb)
[1] REVERB
[2] ECHO
[3] TEMPO DELAY
[4] DUB ECHO
MEMO
You can hold down an eect button to see the currently selected
eect variation (the scene memory button blinks).
Installing Batteries
As an alternative to USB bus power, you can use commercially available
AA nickel-metal hydride batteries or alkaline batteries to power the unit.
* If USB bus power is being supplied, the unit uses USB bus power
even if batteries are installed.
1. Remove the battery cover.
* When turning the unit over, be careful so as to protect the buttons
and knobs from damage. Also, handle the unit carefully; do not
drop it.
2. Taking care to observe the correct orientation of the
batteries, insert the batteries into the battery case.
3. Close the battery cover.
* If you handle batteries improperly, you risk explosion and uid
leakage. Make sure that you carefully observe all of the items related
to batteries that are listed in the leaet “USING THE UNIT SAFELY.”
Battery replacement indicator (PEAK indicator)
When the batteries run low, the PEAK indicator blinks rapidly. When this
occurs, install new batteries.