Specifications

STUDIO-CAPTURE Specications
STUDIO-CAPTURE
USB2.0 Audio Interface
- Number of Audio Record/Playback Channels
Sampling Rate: 96 kHz, 48 kHz, 44.1 kHz
Record: 16 channels
Playback: 10 channels
Sampling Rate: 192 kHz
Record: 8 channels
Playback: 4 channels
- Signal Processing
PC Interface: 24 bits
AD/DA Conversion: 24 bits
- Sampling Rate
AD/DA Conversion: 192 kHz, 96 kHz, 48 kHz, 44.1 kHz
DIGITAL (IN/OUT): 96 kHz, 48 kHz, 44.1 kHz
- Nominal Input Level (variable)
Input 1--12 Jacks (XLR type): -60-- -2 dBu
Input 1--12 Jacks (1/4-inch TRS phone type): -54--+4 dBu
Input 13--16 Jacks (1/4-inch TRS phone type): -20, -10,
+4 dBu
- Nominal Output Level
OUTPUT 1--8 Jacks: +4 dBu (balanced)
- Headroom
18 dB
- Input Impedance
Input 1--12 Jacks (XLR type): 8.2 k ohms (balanced)
Input 1--12 Jacks (1/4-inch TRS phone type): 18 k ohms
(balanced)
Input 13--16 Jacks (1/4-inch TRS phone type): 38 k ohms
(balanced)
- Output Impedance
OUTPUT 1--2 Jacks (XLR type): 600 ohms (balanced)
OUTPUT 1--8 Jacks (1/4-inch TRS phone type): 2k ohms
(balanced)
PHONES: 47 ohms
- Frequency Response
192.0 kHz: 20 Hz--60 kHz (+0/-2 dB), 20 Hz--90 kHz (+0/-8
dB)
96.0 kHz: 20 Hz--40 kHz (+0/-2 dB)
48.0 kHz: 20 Hz--22 kHz (+0/-2 dB)
44.1 kHz: 20 Hz--20 kHz (+0/-2 dB)
- Residual Noise Level
INPUT 1--2 -> OUTPUT 1--2: -90 dBu typ. (SENS = min.,
Input terminated with 600 ohms, IHF-A)
* Input Channel Fader = Unity
- Dynamic Range
AD Block INPUT 1--2: 105 dB typ. (SENS = min.)
DA Block OUTPUT 1--2: 114 dB typ.
- Display
Graphic LCD 128 x 64 dots
- Connectors
INPUT 1--12 Jacks *1: XLR type (balanced, phantom
power *2: DC +48 V (unloaded maximum), 10 mA
(maximum load))
INPUT 1--16 Jacks: 1/4-inch TRS phone type (balanced)
PHONES Jack: Stereo 1/4-inch phone type
OUTPUT 1--8 Jacks: 1/4-inch TRS phone type (balanced)
COAXIAL IN Jack: RCA phono type (conforms to
IEC60958)
COAXIAL OUT Jack: RCA phono type (conforms to
IEC60958)
MIDI (IN, OUT) Connectors
USB Port: USB Type B
DC IN Jack
*1 INPUT 1--2 jacks support high impedance
*2 Provided on all XLR-type input jacks. Current value is
per channel. Total must not exceed 50 mA.
- Interface
Hi-Speed USB
- Power Supply
AC Adaptor
- Current Draw
1.6 A
- Dimensions
284 (W) x 162 (D) x 89 (H) mm
11-3/16 (W) x 6-7/16 (D) x 3-9/16 (H) inches
- Weight (excluding AC adaptor and rack mount angles)
1.9 kg
4 lb 4 oz
- Accessories
Owner's Manual
Block Diagram Leaet
AC Adaptor
STUDIO-CAPTURE Driver CD-ROM
Rack Mount Angle x 2
USB Cable
License Agreement
* 0 dBu = 0.775 Vrms
All specications and appearances are subject to change.