Specifications

DA-2 Specications
DA-2
Adaptive Distortion
- Nominal Input Level
-20 dBu
- Input Impedance
1 M ohm
- Nominal Output Level
-20 dBu
- Output Impedance
1 k ohm
- Recommended Load Impedance
10 k ohms or greater
- Controls
Pedal switch
LEVEL knob
LOW knob
HIGH knob
A-DIST (Adaptive Distortion) knob
- Indicator
CHECK indicator (Serves also as battery check indicator)
- Connectors
INPUT jack
OUTPUT jack
AC adaptor jack (DC 9 V)
- Power Supply
Alkaline Battery (9V, 6LR61) or Carbon-zinc Battery (9V, 6F22)
AC Adaptor (sold separately)
- Current Draw
45 mA
- Expected battery life under continuous use (These gures will
vary depending on the actual conditions of use.):
Alkaline: Approx. 9 hours
Carbon: Approx. 2.5 hours
- Dimensions
73 (W) x 129 (D) x 59 (H) mm
2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches
- Weight (including battery)
420 g
15 oz
- Accessories
Owner's Manual
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTE," and
"Information")
Alkaline Battery (9V, 6LR61)
- Option (sold separately)
AC Adaptor (PSA Series)
* 0 dBu = 0.775 Vrms
All specications and appearances are subject to change.