Owner`s manual

6
Connecting Via USB
To connect your iPad to the VR-09, you’ll need to purchased and attach
a USB adapter to your iPad. If you’ve got an
• iPad 3 or earlier—you’ll need an Apple iPad Camera Connection
Kit.
• iPad 4 or later, or iPad mini—you’ll need an Apple Lightning to USB
Camera Adapter.
To connect the iPad and VR-09:
1 Attach your iPad’s USB adapter to the iPad’s
connector jack.
2 Connect the wide, flat A plug of a standard USB
A-B cable to the iPad’s USB adapter.
3 Connect the narrower B plug of the USB cable
to the VR-09’s rear-panel USB COMPUTER
jack.
A
plug
B
plug
Using the VR-09 Editor iPad App
Configuration
When you first launch the VR-09 Editor app on your iPad, you’ve got to
pair it with your VR-09. Here’s how.
1 In the VR-09 Editor, touch the gear icon located in
the upper-righthand corner of the screen to display a
window in which you can see your VR-09.
If you’ve got multiple VR-09s WiFi-enabled, you’ll see them all in
this list.
2 Touch the VR-09 you want to program—a checkmark appears
next to its name.
3 Touch somewhere outside the list to close it.