Owner`s manual

5
8 On your iPad, open the Settings app.
9 Touch Wi-Fi along the left-hand edge.
10 In the Choose a Network... area, touch VR-09.
The Enter Password sheet appears:
11 Enter the five-digit Ad-Hoc KEY number from the screen of your
VR-09 into the iPad’s Password field, and then touch Join.
You’re returned to the iPad’s WiFi tab where the checkmark next
to “VR-09” shows that the WiFi connection’s been made.
If You Have Trouble Connecting in Ad-Hoc Mode
If you have problems making or maintaining a connection between the
VR-09 and iPad, try changing the VR-09 Ad-Hoc mode channel:
1 On the VR-09, press MENU, select Wireless, and then press
ENTER.
2 Use the CURSOR buttons to display the Options screen, and
then press ENTER.
3 Use the CURSOR buttons to display the Ad-Hoc Channel
screen and turn the VALUE dial to select a different channel.
4 Redo Steps 8-11 above for selecting the VR-09 on the iPad.
Keeping an Eye on Your WiFi Connection
After making your WiFi connection, press EXIT on the VR-09 until
you return to the main screen in Organ or Synth mode. In the upper-
righthand corner of the screen, you’ll see an icon that gives you the
status of your WiFi connection at a glance.
This icon Tells you this about your WiFi connection
As with the bars on a cell phone, this shows you the
strength of your WiFi connection to your LAN.
Your WNA1100 is installed, but there’s no WiFi
connection currently active.
You’re using an Ad-Hoc WiFi connection directly to
your iPad.
no icon
Your WNA1100 isn’t inserted in the USB MEMORY
jack.
Settings