Owner`s manual

15
MODULATION LFO Controls—These settings control vibrato added
to the partial when you push the VR-09’s Pitch Bend/Modulation
lever forward.
Setting This setting: Can be set to:
FILTER
DEPTH
sets the amount of the lever
LFO applied to the partials
filter Cutoff.
-63 to +63
AMP
DEPTH
sets the amount of the lever
LFO applied to the partials
volume.
-63 to +63
LFO Controls—These settings determine the behavior of an LFO you
can apply to the partial’s pitch, filter, and/or volume.
Setting This setting: Can be set to:
SHAPE sets the type of wave shape
the LFO uses as it cycles over
and over.
triangle wave
sine wave
sawtooth
wave
square wave
sample and
hold—the wave
shape changes
with each cycle.
RND (Random)—
the LFO shape
changes randomly
constantly.
TEMPO
SYNC
acts as an on/off switch for
Tempo Sync, which locks the
LFO cycle with the VR-09s
DRUM-area tempo.
ON (green), OFF
(unlit)
LFO Controls—These settings determine the behavior of an LFO you
can apply to the partial’s pitch, filter, and/or volume.
Setting This setting: Can be set to:
RATE sets the rhythmic relationship
between the LFO and the
DRUM tempo when Tempo
Sync is on.
16, 12, 8, 4, 2,
1 (beat value),
assorted time
signatures
FADE
TIME
sets how long it takes for the
LFO to reach its full effect after
the key is pressed.
0 to 127
PITCH
DEPTH
sets the amount of the LFO
applied to the partial’s pitch.
-63 to +63
FILTER
DEPTH
sets the amount of the LFO
applied to the partials filter
Cutoff.
-63 to +63
AMP
DEPTH
sets the amount of the LFO
applied to the partial’s volume.
-63 to +63
Saving iPad ORGAN and SYNTH Sounds
Changes you make to sounds using the VR-09 Editor app are
temporary—to preserve them, save them as registrations on the VR-09.
To learn all about registrations, see the VR-09 Workshop booklet
Using Registrations.
The End
We hope you’ve found this Workshop booklet helpful. If you’re
interested in learning more, we’ve got some great VR-09 video articles
in our Knowledge Base. And be sure to keep an eye out for other VR-09
downloads at www.RolandUS.com.