Specifications

6
Startup and settings
5. If you’re using VariOS 303 by itself, set the Through Output field to “ Roland VariOS MIDI .”
If you are using VariOS 303 with other sequencer software, set the Through Output field to “ none ” to prevent VariOS 303
from sounding notes in duplicate.
6. The Receive Ch field specifies VariOS 303’s MIDI receive channel. VariOS 303 will receive note-on and control change
messages on the channel you specify here. If you’ve connected a MIDI keyboard, set this channel to match the channel your
MIDI keyboard is using for transmission.
* The setting of the Receive Ch field is linked with the [Menu2 Receive Channel] setting of the VariOS hardware module.
Refer to “ Setting the MIDI Receive Channel ” on p. 8.