Specifications

18
Starting up VariOS 303 from a PC card
7. Unmount the PC card drive that is mounted on your computer.
• Windows:
In the task tray, double-click the eject icon. Then click the item that indicates the PC card drive (this will differ depending
on your version of Windows; see below) to unmount the drive.
fig.02-taskicon
• Macintosh:
Drag the PC CARD on the desktop into the “Trash”.
* The PC CARD you dragged into the Recycle Bin will be mounted again, but this is not a problem.
8. Turn off the power of the VariOS.
This completes the installation. Refer to "Usage," below.
If your computer has a PC card reader
First use the "Installation" (p. 4) procedure described in this manual to copy VB.prj to the internal flash ROM of the VariOS.
1. Start up your computer, and insert the PC card into the PC card reader.
2. From the VariOS Program folder, drag VPD-02 for VariOS.BIN to copy it into the PC card drive.
3. Rename the copied file VPD-02 for VariOS.BIN as follows. (Change the third character from "D" to "I" (the uppercase letter "I";
not the numeral "one").
VPD-02 for VariOS.BIN
↓
VPI-02 for VariOS.BIN
4. Unmount the PC card drive that is mounted on your computer.
This completes the installation. Refer to "Usage," below.
Usage
1. When you insert the PC card into the VariOS and power-on the VariOS, the VariOS trial application that was written to the PC
card will start up.
If you want to start up the internal program of the VariOS, remove the PC card and power-on the VariOS.
2. If you have copied more than one trial application to the PC card, the display will indicate "Select Program" when the VariOS
starts up. Turn the [VALUE] knob to select the desired application, and press [ENTER] to start up.
Windows XP, 2000 USB high-capacity storage device
Windows Me USB disk
If the patch name does not appear (i.e., displayed as "001: "), the VariOS's internal flash ROM does not contain patch
data. Copy VB.prj into the VariOS's internal flash ROM as described in "Installation" (p. 4).