English Deutsch Français Italiano Español Português Owner’s Manual Bedienungsanleitung Mode d’emploi Manuale dell’utente Manual del usuario Manual do proprietário Gebruikershandleiding Nederlands
TD-4_e.book 1 ページ ２００８年１１月５日 水曜日 午後６時４０分 English Deutsch Français Italiano Español Thank you, and congratulations on your choice of the Roland Percussion Sound Module TD-4. Português Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (Owner’s manual p. 2–3; p. 4). These sections provide important information concerning the proper operation of the unit.
TD-4_e.book 2 ページ ２００８年１１月５日 水曜日 午後６時４０分 USING THE UNIT SAFELY The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
TD-4_e.book 012b • 3 ページ ２００８年１１月５日 水曜日 午後６時４０分 Immediately turn the power off, remove the AC adaptor from the outlet, and request servicing by your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page when: 101f • • The AC adaptor, the power-supply cord, or the plug has been damaged; or • Objects have fallen into, or liquid has been spilled onto the unit; or • The unit has been exposed to rain (or otherwise has become wet); or ....
TD-4_e.book 4 ページ ２００８年１１月５日 水曜日 午後６時４０分 IMPORTANT NOTES Power Supply Repairs and Data 301 452 • Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or that contains a motor. Depending on the way in which the electrical appliance is used, power supply noise may cause this unit to malfunction or may produce audible noise.
TD-4_e.book 5 ページ ２００８年１１月５日 水曜日 午後６時４０分 Contents Front Panel ...........................................................................6 Side Panel .............................................................................7 Rear Panel .............................................................................7 Bottom Panel ......................................................................7 Mounting the TD-4 on the Stand .................................8 Connecting Your Audio Equipment.....
TD-4_e.book 6 ページ ２００８年１１月５日 水曜日 午後６時４０分 Panel Descriptions Front Panel fig.FrontP.eps 7 9 11 12 1 2 3 1. 2. 5 4 [POWER] button Use this to adjust a value. Turning the dial toward “+” will increase the value, and turning it toward “-” will decrease the value. [TUNING] button [MUFFLING] button DRUM KIT [<] [>] buttons Use these to switch drum kits (p. 12). You’ll also use these buttons to return to the drum kit screen from other screens (except during recording/playback). 6.
TD-4_e.book 7 ページ ２００８年１１月５日 水曜日 午後６時４０分 Panel Descriptions Side Panel fig.SideP.eps 15 16 17 English Deutsch 15. MIDI OUT connector 16. MIX IN jack Use this when you want to use the pads to play external MIDI sound sources or for recording with sequencers (p. 41). For connecting an external audio source such as MP3 or CD players (p. 16). All sound input here is also sent from the OUTPUT and PHONES jacks. 17.
TD-4_e.book 8 ページ ２００８年１１月５日 水曜日 午後６時４０分 Getting Ready to Play Mounting the TD-4 on the Stand 1. Attach the included sound module mounting plate to the TD-4. Use the included wing bolts to attach the plate as shown in the illustration. Labels indicating the pad to be connected are attached to the cable. Connect the pads and pedals as shown in the illustration. fig.Trig-Plug.eps * Use only the included wing bolts. Using any other nuts may cause malfunction.
TD-4_e.book 9 ページ ２００８年１１月５日 水曜日 午後６時４０分 Getting Ready to Play Connecting Your Audio Equipment fig.Connection.eps Portable Audio Player English MIDI Sound Module MIDI IN Deutsch Stereo miniature plug Français Stereo 1/4” phone plug AC Adaptor Italiano Power Cord Indicator Stereo Headphones Español To AC Outlet 1. Power-off all equipment before making connections. 2. Connect the OUTPUT jacks (L/MONO, R) to your audio system or amp.
TD-4_e.book 10 ページ ２００８年１１月５日 水曜日 午後６時４０分 Getting Ready to Play Turning the Power On/Off * Once connections have been made (p. 9), turn on the power to the connected equipment in the order specified. Doing it in the wrong order raises the risk of damage/malfunction to that equipment. fig.P-PowerOn.eps If you don’t hear any sound 3 1 Check the following points.
TD-4_e.book 11 ページ ２００８年１１月５日 水曜日 午後６時４０分 Getting Ready to Play Tensioning the Head of a Mesh Pad (PDX-8) BEFORE using the PDX-8 mesh pads you must adjust the tension. English You can tension mesh heads the same way you do with acoustic drums. * Use a drum key to make adjustments. Adjusting the tension of the PDX-8 head is only for playing response and will not affect the pitch as on an acoustic drum. Use the included drum key to tighten the tuning bolts. Deutsch 1.
TD-4_e.book 12 ページ ２００８年１１月５日 水曜日 午後６時４０分 Playing Hearing What the Kits Sound Like After turning the power on, you can play the demo patterns. 1. Press the [ ] (Play/Stop) button. The demo patterns will play. 2. Press the DRUM KIT [<] [>] buttons to select drum kit. Here’s how you can listen to the sounds by switching drum kits while playing the demo patterns. fig.P-Demo.eps 3. To stop demo pattern playback, press the [ 2 1, 3 * All rights reserved.
TD-4_e.book 13 ページ ２００８年１１月５日 水曜日 午後６時４０分 Playing Performance Techniques Pads (e.g., PDX-8, PD-8) Cymbals (e.g., CY-8, CY-12R/C) Bow Shot Hit only the head of the pad. The most common method, playing the middle area of the cymbal. fig.Play-Head.eps English Head Shot fig.Play-CYBow.eps Deutsch Head Open Rim Shot Edge Shot Strike the rim of the pad. fig.Play-CYEdge.eps Français When striking the edge with the shoulder of the stick (as shown in the figure). fig.Play-Rim.
TD-4_e.book 14 ページ ２００８年１１月５日 水曜日 午後６時４０分 Playing Hi-Hat (CY-5) Open/Closed Hi-Hat Control Pedal FD-8 fig.FD-8.eps The hi-hat sound will change smoothly between open and closed depending on pressure applied to the hi-hat control pedal. Foot closed and foot splash sounds are possible. Bow Shot Playing the middle area of the hi-hat pad. fig.Play-VHBow.eps Open Hi-Hat Strike the hi-hat without pressing the pedal. Half Open Hi-Hat Strike the hi-hat with the pedal pressed half-way.
TD-4_e.book 15 ページ ２００８年１１月５日 水曜日 午後６時４０分 Playing Quickly Tuning or Muffling You can use dedicated buttons to quickly tune or muffle the sound. When you press the button, the sound you selected will be heard. TUNING MUFFLING fig.P-Muffling.eps 3 3 1. The TUNING screen appears. Press the [MUFFLING] button so it’s lit. The MUFFLING screen appears. The selected pad will sound at this time. The selected pad will sound at this time. 2. 2. The pad you struck will blink in the screen.
TD-4_e.book 16 ページ ２００８年１１月５日 水曜日 午後６時４０分 Playing If Head/Rim Link (p. 37) is “ON,” both the HEAD and the RIM settings will be edited simultaneously. In some cases, you may see an “*” in the right side of the screen; this indicates that the tuning/muffling values specified for the HEAD and the RIM are different. Playing Along with a Portable Audio Player By connecting a portable audio/CD player to the MIX IN jack you can play the TD-4 with your favorite songs.
TD-4_e.book 17 ページ ２００８年１１月５日 水曜日 午後６時４０分 Practicing Playing with the Metronome fig.P-Metronome.eps 2 Press the [ The TD-4 provides a Quick Rec function that lets you easily record your own performance. This is a very useful practice tool, recording and then checking your drumming. Whenever you turn on the power, the TD-4 is prepared for the playback of its demo patterns. After you’ve made a recording, if you turn off the power, the data for the recording will be erased.
TD-4_e.book 18 ページ ２００８年１１月５日 水曜日 午後６時４０分 Practicing 2. Hit any pad/pedal and recording begins. 2. The following screen appears. To stop playback, press the [ button and the button goes dark. ] (Play/Stop) When playback has finished, the [ button automatically goes dark. ] (Play/Stop) fig.d-Rec-2.eps ] (Rec) button and Using Time Check to Check Your Recorded Performance * If you exceed the maximum recording time, recording stops automatically.
TD-4_e.book 19 ページ ２００８年１１月５日 水曜日 午後６時４０分 Practicing Practicing in Coach Mode The TD-4’s Coach mode is a unique set of exercises specifically designed to help build speed, accuracy and stamina, as well as develop better timing skills. English Throughout the Coach modes, you will discover that some of them have programmable parameters, allowing you to adapt the functions to your specific needs. Selecting a Practice Menu fig.P-CoachMenu.eps Menu Explanation Deutsch 1 Warm Ups p.
TD-4_e.book 20 ページ ２００８年１１月５日 水曜日 午後６時４０分 Practicing <1> WARM UPS In this mode you’ll successively practice steps 1–3, be graded on your performance at each step, and then receive a final evaluation. You can choose one of three courses, ranging from easy to difficult. You can also adjust the tempo according to your level of skill. Start practicing Step 2: AutoUpDown fig.WarmUp-1.eps The tempo will gradually be raised and lowered.
TD-4_e.book 21 ページ ２００８年１１月５日 水曜日 午後６時４０分 Practicing When you’ve finished practicing Press the [OK] button to return to the Coach mode menu screen. Change-up: Step 1: Selects the pattern by which the rhythm will vary during Change-up. fig.WarmUp-Op3.eps English Select a course and make settings 1. From the WARM UPS start screen, press the [MENU] button so it’s lit. fig.WarmUp-Op1.eps Use the SEL [ parameter. ][ ] buttons to select a 3. Turn the [-/+] dial to edit the value. 4.
TD-4_e.book 22 ページ ２００８年１１月５日 水曜日 午後６時４０分 Practicing <2> Correctly Playing in Time with the Beat (TIME CHECK) This mode lets you practice playing accurately along with the metronome. Start practicing Settings fig.TimeCheck-1.eps 1. In the TIME CHECK start screen, press the [MENU] button so it’s lit. fig.TimeCheck-Op1.eps 1. In the TIME CHECK start screen, press the [ button to start practicing. ] You can use the [-/+] dial to adjust the tempo even while you practice. 2.
TD-4_e.book 23 ページ ２００８年１１月５日 水曜日 午後６時４０分 Practicing Tempo: Specifies the tempo. fig.TimeCheck-Op5.eps English Value 40–260 Deutsch Explanation * You can also set the tempo by using Tap input (p. 34). <3> Continuing to play at a steady tempo (TEMPO CHECK) This mode lets you practice playing at a steady tempo without relying on the tempo sounded by the metronome. Français Start practicing fig.TempoKeep-3.eps fig.TempoKeep-1.eps 1.
TD-4_e.book 24 ページ ２００８年１１月５日 水曜日 午後６時４０分 Practicing Settings Grade: Specifies the strictness with which your tempo will be graded. 1. In the TEMPO CHECK start screen, press the [MENU] button so it’s lit. fig.TempoKeep-Op2.eps fig.TempoKeep-Op2.eps ][ Value EASY HARD 2. Use the SEL[ parameter. ]buttons to select a 3. Use the [-/+] dial to edit the value. 4. Press the [MENU] button to return to the TEMPO CHECK start screen. Explanation Normal Your tempo will be graded more strictly.
TD-4_e.book 25 ページ ２００８年１１月５日 水曜日 午後６時４０分 Practicing • The “%” value indicates the percentage by which you played at an accurate tempo during the “Quiet” indication. fig.d-Quiet-4.eps Quiet: Of the measures specified by “Meas,” this setting specifies the length of the measures that will be “Quiet.” fig.Quiet-Op2.eps English 3. Repeat step 2 to continue practicing. 4. Press the [OK] button to return to the Coach mode menu screen.
TD-4_e.book 26 ページ ２００８年１１月５日 水曜日 午後６時４０分 Practicing <5> Gradually raising and lowering the tempo (AUTO UP/DOWN) The metronome increases and decreases tempo over time, to help develop stamina and endurance. Start practicing 3. Use the [-/+] dial to edit the value. fig.d-AutoUD-1.eps 4. Press the [MENU] button to return to the AUTO UP/ DOWN start screen. Rate: Specifies the speed at which the metronome tempo will increase (decrease). fig.d-AutoUD-Op1.eps 1.
TD-4_e.book 27 ページ ２００８年１１月５日 水曜日 午後６時４０分 Creating a Drum Kit All sounds assigned to a drum kit can be edited for your specific purposes. English Selecting the Parameters fig.P-KitMenu.eps Menu 2 Parameter 1 2. 4 Use the DRUM KIT [<] [>] buttons to select the drum kit that you want to edit. Press the [MENU] button so it’s lit. p. 29 • Volume of each pad • Pan position of each pad • Volume of the entire drum kit • Cross stick volume Français 1. 3 Deutsch p.
TD-4_e.book 28 ページ ２００８年１１月５日 水曜日 午後６時４０分 Creating a Drum Kit Editing Instrument Parameters (INSTRUMENT) On the TD-4, each of the instruments in the drum kit (e.g., kick drum or snare drum) are called an “instrument (INST).” 1. In the menu screen, choose “1 INSTRUMENT” and press the [OK] button. The “Instrument” screen will appear. fig.d-Kit-Inst-1.eps 2. Use the SEL[ parameter. ][ ]buttons to select a 3. Strike a pad to select the pad whose settings you want to edit.
TD-4_e.book 29 ページ ２００８年１１月５日 水曜日 午後６時４０分 Creating a Drum Kit Adjusting the volume of the pads or drum kit (MIXER) Adjusting the volume and pan (stereo position) of individual pads/pedals. In the menu screen, choose “2 MIXER” and press the [OK] button. The “Mixer” screen will appear. fig. ][ English 1. 2. Use the SEL[ parameter. ]buttons to select a 3. If the parameter is “Pad Volume” or “Pan,” strike a pad to select the pad whose setting you want to edit.
TD-4_e.book 30 ページ ２００８年１１月５日 水曜日 午後６時４０分 Creating a Drum Kit Using the Onboard Effects (AMBIENCE) “Ambience” refers to resonance of the room in which you’re playing the drums. Changing the ambience settings lets you play in different sounding rooms. 1. In the menu screen, choose “3 AMBIENCE” and press the [OK] button. The “Ambience” screen will appear. fig.d-Kit-Ambi-1.eps Screen 2. Use the SEL[ parameter. ][ ]buttons to select a 3. Use the [-/+] dial to edit the setting. 4.
TD-4_e.book 31 ページ ２００８年１１月５日 水曜日 午後６時４０分 Creating a Drum Kit Copying a Drum Kit (COPY) You can copy drum kits. English The copy-destination settings will be lost when you execute the Copy operation. Use this operation with care. 1. In the menu screen, choose “5 KIT COPY” and press the [OK] button. 7. The “Kit Copy” screen will appear. fig.d-Kit-Copy-4.eps Press the SEL [ ] button. A confirmation message will blink. Deutsch fig.d-Kit-Copy-1.
TD-4_e.book 32 ページ ２００８年１１月５日 水曜日 午後６時４０分 Creating a Drum Kit Exchanging Drum Kits (EXCHANGE) You can exchange drum kits. 1. In the menu screen, choose “5 KIT COPY” and press the [OK] button. 7. The “Kit Copy” screen will appear. fig.d-Kit-Copy-4.eps Press the SEL [ ] button. A confirmation message will blink. fig.d-Kit-Copy-1.eps * You can cancel by pressing the [MENU] button. 2. Use the [-/+] dial to select EXCHANGE. 8. To execute the Exchange operation, press the [OK] button.
TD-4_e.book 33 ページ ２００８年１１月５日 水曜日 午後６時４０分 Creating a Drum Kit Restoring a Drum Kit (RESTORE) You can rewrite (restore) a specified drum kit’s settings to the factory settings (preset). English The restore-destination settings will be lost when you execute the Restore operation. Use this operation with care. 1. In the menu screen, choose “5 KIT COPY” and press the [OK] button. 7. The “Kit Copy” screen will appear. fig.d-Kit-Copy-4.eps Press the SEL [ ] button.
TD-4_e.book 34 ページ ２００８年１１月５日 水曜日 午後６時４０分 System Settings Here you can edit the “System parameters,” which affect the overall operation of the TD-4. Specifying How the Metronome will Sound (METRONOME) 1. Press the [MENU] button so it’s lit. The Metronome screen appears. fig.d-Sys-Metro-1.eps The MENU screen appears. fig.d-KitMenu-1.eps 2. Use the SEL[ ][ ]buttons to choose “7 METRONOME,” and press the [OK] button. Screen Parameter Value Tempo (Tap) 40–260 Beat 1–9 3.
TD-4_e.book 35 ページ ２００８年１１月５日 水曜日 午後６時４０分 System Settings Editing the pad settings (PAD SETTINGS) 1. Press the [MENU] button so it’s lit. 2. The MENU screen appears. English fig.d-KitMenu-1.eps Use the SEL[ ][ ]buttons to choose “8 PAD SETTINGS,” and press the [OK] button. The Pad Settings screen appears. fig.d-Sys-Pad-1.eps 4. Use the [-/+] dial to edit the value. 5. Press the [OK] button to return to the “MENU” screen.
TD-4_e.book 36 ページ ２００８年１１月５日 水曜日 午後６時４０分 System Settings Screen Parameter/Value Explanation HH Pedal Sens -5–+5 Adjusts the sensitivity of the “foot close” or “foot splash” sound. Positive (+) values will produce a louder sound even when you press the pedal lightly. Xstick Adjust -9–+9 Specifies the striking force at which the cross stick and open rim shot sounds are switched. Positive (+) values will play the cross stick sound even for stronger strikes.
TD-4_e.book 37 ページ ２００８年１１月５日 水曜日 午後６時４０分 System Settings Adjusting the Display Contrast (LCD Contrast) fig.d-Sys-Option-1.eps Restoring the Factory Settings (Factory Reset) The “Factory Reset” operation returns all settings of all pads and drum kits stored in the TD-4 to their factory-set condition. Value 1–10 English * If you want to return an individual kit to its factory settings, execute the drum kit “Restore” operation (p. 33).
TD-4_e.book 38 ページ ２００８年１１月５日 水曜日 午後６時４０分 Expanding your drum set Using a CY-12R/C or CY-15R instead of the CY-8 cymbal Adding a CRASH 2 cymbal Here’s an example of adding a separately sold cymbal (CY-8) to the TD-4K as “Crash Cymbal 2” (CRASH 2). Here’s an example of replacing the RIDE cymbal (CY-8) with a separately sold CY-12R/C or CY-15R. fig.Expand-1.eps fig.Expand-2.
TD-4_e.book 39 ページ ２００８年１１月５日 水曜日 午後６時４０分 Expanding your drum set Using the VH-11 V Hi-hat Here’s an example of using the VH-11 (sold separately) as the hi-hat. Connecting the VH-11 and Making Settings on the TD-4 English The VH-12 is not supported. Connections Deutsch fig.VH-Connect.eps Clutch Screw Français Motion Sensor Unit TRIGGER OUT Jack Italiano CONTROL OUT Jack Connect the HHC cable Connect the HH cable • Connect the “HH” trigger cable to the TRIGGER OUT jack.
TD-4_e.book 40 ページ ２００８年１１月５日 水曜日 午後６時４０分 Expanding your drum set 5. Use the SEL [ ][ ] buttons to choose “8 PAD SETTINGS,” and press the [OK] button. The Pad Type screen will appear. fig.d-Sys-Pad-1.eps VH Offset Adjustment Points If the closed hi-hat sound is difficult to attain, rotate the VH offset adjustment screw towards “CLOSE.” If the open hi-hat sound is difficult to attain, rotate the screw towards “OPEN.” 6. Lightly strike the hi-hat; the screen will indicate “HH.” 7.
TD-4_e.book 41 ページ ２００８年１１月５日 水曜日 午後６時４０分 Other Settings MIDI Settings MIDI-related Settings English 1. About MIDI Press the [MENU] button so it’s lit. The MENU screen appears. fig.d-KitMenu-1.eps Deutsch MIDI (Musical Instrument Digital Interface) is a standard that allows performance data and other information to be exchanged among electronic musical instruments and computers. On the TD-4 you can use MIDI in the following ways.
TD-4_e.book 42 ページ ２００８年１１月５日 水曜日 午後６時４０分 Other Settings Display Parameter ProgramChg Tx Value Explanation Specifies whether program change messages will be transmitted to an external MIDI device (ON) or not transmitted (OFF). With the “ON” setting, a program number corresponding to the selected drum kit will be transmitted when you switch drum kits on the TD-4. OFF, ON * The program number for each drum kit is the same as the drum kit number.
TD-4_e.book 43 ページ ２００８年１１月５日 水曜日 午後６時４０分 Other Settings Display/Parameter Parameter/Value LOG1, LOG2 Compared to LINEAR, a soft playing produces a greater change. fig.VeloC-LOG.eps Volume LOUD1, LOUD2 Very little dynamic response, making it easy to maintain strong volume levels. If using drum triggers, these settings help maintain stable levels. fig.VeloC-LOUD.
TD-4_e.book 44 ページ ２００８年１１月５日 水曜日 午後６時４０分 Other Settings Display/Parameter Parameter/Value Explanation Mask Time 0–64 ms This setting prevents double triggering. When playing a kick trigger, the beater can bounce back and hit the head a second time immediately after the intended note—with acoustic drums sometimes the beater stays against the head—is causes a single hit to “double trigger” (two sounds instead of one). The Mask Time setting helps to prevent this.
TD-4_e.book 45 ページ ２００８年１１月５日 水曜日 午後６時４０分 Other Settings Protecting Modified Kits and Settings (Edit Lock) When this function is turned on, editing of the kits remains possible. However, any changes made will be ignored once the power is turned off. English This is especially useful for in-store purposes and /or music shows. Or let’s imagine that you have modified many kits, and some friends come over to your place, and start playing your TD-4.
TD-4_e.book 46 ページ ２００８年１１月５日 水曜日 午後６時４０分 Troubleshooting This section outlines points to check if you experience problems, and what to do about them. Demo patterns won’t play Pad Not Playing Correctly ❏ Could you be recording? ❏ Is the pad type setting correct? → If you press the [ ] (Rec) button to record your performance (p. 17), the demo patterns will temporarily be erased, but you will again be able to hear the demo patterns after you turn the power off, then on again.
TD-4_e.book 47 ページ ２００８年１１月５日 水曜日 午後６時４０分 Troubleshooting Cross Stick Does Not Work ❏ Are you playing the cross stick correctly? ❏ Is the Xstick Volume set to “OFF”? → Set the Xstick Volume to a value other than “OFF” (p. 29). → Use a connection cable that does not contain a resistor. ❏ Check the volume level of the connected audio source. → See the owner’s manual for the device if there’s a problem.
TD-4_e.book 48 ページ ２００８年１１月５日 水曜日 午後６時４０分 Error Messages Display 48 Meaning Action Data in the TD-4’s memory is corrupted. Press the [OK] button. A factory reset will be executed. (doing so will erase any changes you have made). If this does not resolve the problem, consult your Roland dealer or nearest Roland Service Center. A problem has occurred with the internal system. Contact your dealer or a nearby Roland service center.
TD-4_e.book 49 ページ ２００８年１１月５日 水曜日 午後６時４０分 Drum Kit/Instrument List Preset Drum Kits Instruments Name No. 1 V-Compact Kick Coated 1 Maple Power 2 Deep 3 Fiber 2 3 Name No.
TD-4_e.book 50 ページ ２００８年１１月５日 水曜日 午後６時４０分 Drum Kit/Instrument List No. Name Crash 1 2 3 4 5 6 7 8 No. Name About the instruments (sounds) The last letter of each instrument name refers to the following definitions. 16 TriangleOp Medium16” 17 TriangleCl Medium16”E 18 SleighBell Medium18” 19 TreeChimes Medium18”E OFF Dark 16” rim sound of snare E: edge sound of cymbal B: Off Dark 16” E R: /B: bell sound of cymbal Switches to the bell sound when struck forcefully.
TD-4_e.book 51 ページ ２００８年１１月５日 水曜日 午後６時４０分 MIDI Implementation Chart PERCUSSION SOUND MODULE Date: Dec. 1, 2008 MIDI Implementation Chart Model TD-4 Transmitted Function... Default Changed 1–16, OFF 1–16, OFF Mode Default Messages Altered Mode 3 X X X *3 Remarks Memorized English Basic Channel Recognized Version : 1.
TD-4_e.book 52 ページ ２００８年１１月５日 水曜日 午後６時４０分 Specifications TD-4: Percussion Sound Module ● Instruments Drum Instruments: 125 ● Drum Kits 25 ● Instrument Parameters KICK, SNARE, TOM, PERC, Tuning, Muffling ● Mixer Parameters Pad Volume, Pan, Kit Volume, Cross Stick Volume ● Ambience Types 9 ● Rhythm Coach Functions ● Power Supply AC Adaptor (DC 9 V) ● Current Draw 500 mA ● Dimensions 224.0 (W) x 151.1 (D) x 65.
TD-4_e.book 53 ページ ２００８年１１月５日 水曜日 午後６時４０分 Index Symbols H A Advanced Edit ....................................... 36 AMBIENCE ............................................... 30 AUTO UP/DOWN .................................. 26 AutoUpDown ........................................ 20 Beat ........................................................... 34 Bell Shot ................................................... 13 Bow Shot .......................................... 13–14 C F Factory Reset ...........
TD-4_e.
Info_e.fm 1 ページ ２００８年１１月５日 Information AFRICA EGYPT Al Fanny Trading Office 9, EBN Hagar Al Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: (022)-418-5531 REUNION Maison FO - YAM Marcel 25 Rue Jules Hermann, Chaudron - BP79 97 491 Ste Clotilde Cedex, REUNION ISLAND TEL: (0262) 218-429 SOUTH AFRICA T.O.M.S. Sound & Music (Pty)Ltd. 2 ASTRON ROAD DENVER JOHANNESBURG ZA 2195, SOUTH AFRICA TEL: (011)417 3400 Paul Bothner(PTY)Ltd.
Info_e.
English Deutsch Français Italiano Español Português Owner’s Manual Bedienungsanleitung Mode d’emploi Manuale dell’utente Manual del usuario Manual do proprietário Gebruikershandleiding Nederlands
