User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Configuring the Overall Kit (KIT EDIT2)
71
Parameter
Value
Explanation
Click-Track Loop
OFF, ON
Plays back the wave to use as a click track in a loop (only
enabled when “Click Mode” is “PLAY WAVE as CLICK-
TRACK”).
LED Reference
OFF, ON
Sets whether to make the [CLICK] button blink in time
with the click (ON) or not (OFF). (This is enabled when
Click Mode is “PLAY INTERNAL CLICK” or “PLAY WAVE as
CLICK”.)
Setting the output destination ([F3] OUTPUT)
Use the cursor [à] [á] buttons to select a parameter, and use the [-] [+] buttons or the [VALUE] knob to edit the value.
Parameter
Value
Explanation
Output
MASTER+PHONES, PHONES-ONLY
Selects the output destination for the click.
MASTER+PHONES: Outputs to the PHONES jack and MASTER
OUT jack (when “Master Direct Sw” is “NORMAL”).
PHONES-ONLY: Outputs only to the PHONES jack. No sound is
output from the MASTER OUT jacks.
Direct Output
OFF, DIRECT 1–4, DIRECT 1+2/3+4 (L+R),
MASTER DIRECT L/R, MASTER DIRECT L+R
Selects the direct out output destination for the click.
This sets the output from the DIRECT OUT 1-4 jacks and
MASTER OUT jacks (when “Master Direct Sw” is “DIRECT”).
Editing the system click settings ([F6] SYSTEM)
The [F6] (SYSTEM) button is shown when “Click Setting” is set to “SYSTEM” (when the system click is used).
1.
Use the cursor [à] [á] buttons to select a parameter, and use the [-] [+] buttons or the [VALUE] knob to
edit the value.
2.
Press [F3] (EDIT) to show the SYSTEM CLICK screen.
You can make the same settings here as with KIT CLICK.