User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Customizing a kit (KIT EDIT 1)
53
MASTER EQ Settings
Here’s how to configure the settings for the four-band parametric equalizer (master EQ) that’s applied at the final stage of the
master out.
* The master EQ effects are not applied to sound that’s output from the DIRECT OUT jacks.
* If “Master Direct Sw” is set to “DIRECT” in OUTPUT(P.117), the master EQ effect is not applied to the sound coming from the
MASTER OUT jacks.
Parameter
Value
Explanation
Type (only LOW and HIGH)
SHELV (Shelving), PEAK
(MID1 and MID2: fixed to “PEAK”)
Selects how the equalizer effect works.
Q
0.5–16.0
(only when Type is set to “PEAK”)
Adjusts the bandwidth of the frequency region.
Higher values make the width more narrow.
Freq
20 Hz–1 kHz (LOW)
20 Hz–16 kHz (MID1, 2)
1k Hz–16 kHz (HIGH)
Adjusts the center frequency.
Gain
-12–+12 dB
Adjusts the amount of boost/cut.
Kit Volume
-INF, -60.0–+6.0 dB
Adjusts the volume of the kit.
Button
Explanation
[F5] (ON/OFF)
Turns the MASTER EQ on/off.
[F6] (DEFAULT)
Restores the MASTER EQ settings to their default values.
Setting the Output Destination (OUTPUT ASSIGN)
On the OUTPUT ASSIGN screen, press the [F1]–[F5] buttons to select the parameters to configure.
The parameters are the same as those that are set in the OUTPUT/EFFECTS screen. On this OUTPUT ASSIGN screen, you can check
the parameters as a list.
PAD OUT (PAD OUTPUT)
Specifies the output destination for the pad audio.
1.
Select the pad or trigger to set using the cursor [ã] [â] buttons, and select the output destination using
the [-] [+] buttons.