User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Customizing a kit (KIT EDIT 1)
51
Button
Explanation
[F4] (CTRL PRE GATE)
Turns the CTRL PRE GATE on/off.
[F5] (CTRL PREVIEW)
Turns the CTRL PREVIEW on/off.
When this is on, you can temporarily listen to just the control signal going through the side chain.
[F6] (ASSIGN)
Shows the settings screen for the pad and trigger output destinations.
Reading the level meter
Level
meter
Explanation
CTRL IN
Control signal level for the side chain compressor (the signal level after applying the PRE GATE to the control signal
when CTRL PRE GATE is “ON”)
IN
Side chain compressor input level
GR
Side chain compressor gain reduction level
OUT
Side chain compressor output level
MASTER EFFECT Settings
Here are the master effect settings that are applied to the final stage of the master out signal.
* The master effect is not applied to sound that’s output from the DIRECT OUT jacks.
* If “Master Direct Sw” is set to “DIRECT” in OUTPUT(P.117), the master effect is not applied to the sound coming from the
MASTER OUT jacks.
For each master effect type, one, two or more predetermined parameters are assigned to the [MASTER EFFECT] knob.
You only need to switch the MASTER EFFECT on and turn the [MASTER EFFECT] knob to apply the effect to the sound outputted
from MASTER OUT.
Parameter
Value
Explanation
Type
Ø Effect
List(P.151)
Sets the MASTER EFFECT type.
Level
-INF–+6.0 dB
Sets the effect output level.
(Effect
parameters)
Ø Effect
List(P.151)
Ø Effect List(P.151)
For each master effect type, the predetermined parameters are assigned to the [MASTER
EFFECT] knob.
(KNOB) is shown next to these parameters.
Button
Explanation
[F6] (ON/OFF)
Turns the MASTER EFFECT on/off.
You can also set this using the MASTER EFFECT [ON/OFF] button.
Hold down the [SHIFT] button and press the MASTER EFFECT [ON/OFF] button to switch to the MASTER EFFECT screen.