User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Playing
22
1.
While holding down the [PAD CHECK] button, press the pad of the sound that you want to check.
Using the PAD PREVIEW/PLAYER function
With PAD PREVIEW, when you press the [PAD CHECK] button while it is blinking, you can check the sounds that are assigned to the
pads at a fixed velocity.
With PAD PLAYER, you can operate the BWD, FWD, PLAY and other buttons while the PAD PREVIEW/PLAYER window is shown to
play the sounds back from a specified time. This lets you play back a longer backing part from the middle to check it.
1.
Hold down the [SHIFT] button and press the [PAD CHECK] button.
The PAD CHECK button blinks and the PAD PREVIEW/PLAYER function turns on.
Current Pad
Selects the current pad.
You can also select the current pad by holding down the [ENTER] button and pressing the cursor [ã] [â]
buttons.
Velocity
Set the velocity value used for previewing the sounds.
[F3] BWD
Moves the playback start position of the [F5] PLAY button five seconds earlier. When you press the button
during playback, this rewinds five seconds.
[F4] FWD
Moves the playback start position of the [F5] PLAY button five seconds later. When you press the button
during playback, this fast-forwards five seconds.
[F5] PLAY (STOP)
(*1)
Press this button to play back from the start position that’s set.
This changes to STOP when playing back, and playback stops when you press the button.
[F6] CLOSE
Closes the PAD PREVIEW/PLAY screen.
*1: The LAYER “Loop” settings and “Decay” settings are disabled when you play back using the [F5] PLAY button.
2.
Press the [PAD CHECK] button.
This lets you play the current pad (PREVIEW).
3.
To turn the PAD PREVIEW/PLAYER function off, press and hold down the [SHIFT] button again, and then
press the [PAD CHECK] button to make PAD CHECK stop blinking.
Entering safety mode
This function eliminates the need to worry about accidentally operating the wrong buttons or knobs.
When using this function, the unit limits you to only the bare minimum of functions during a live performance.
1.
Hold down the [SHIFT] button and press the [KIT] button.
The unit enters safety mode. The [KIT] button blinks.