User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Effect List
189
Mid-Side Compressor
This effect allows the left/right signals that have similar phase to be adjusted to a different sense of volume than the left/right
signals that have different phase.
Parameter
Value
Explanation
M Comp
Switch
OFF, ON
Switches whether to adjust the sense of volume for left/right input signals that are nearly (or
fully) in phase.
M Attack
0–124
Sets the time from when the input exceeds the Threshold until the volume starts being
compressed.
M Release
0–124
Adjusts the time after the signal volume falls below the Threshold Level until compression is no
longer applied.
M Threshold
(*1)
-60–0 [dB]
Adjusts the volume at which compression begins.
M Knee
0–30 [dB]
This is a function that smooths the onset of compression from the uncompressed state; it
gradually applies compression starting earlier than THRESHOLD. Higher values produce a
smoother transition.
M Ratio
1:1, 1.5:1, 2:1,
4:1, 16:1, INF:1
Compression ratio
M Post Gain
0–+18 [dB]
Adjusts the output gain.
S Comp
Switch
OFF, ON
Switches whether to adjust the sense of volume for left/right input signals whose signals are
considerably out of phase
S Attack
0–124
Sets the time from when the input exceeds the Threshold until the volume starts being
compressed
S Release
0–124
Adjusts the time after the signal volume falls below the Threshold Level until compression is no
longer applied.
S Threshold
-60–0 [dB]
Adjusts the volume at which compression begins
S Knee
0–30 [dB]
This is a function that smooths the onset of compression from the uncompressed state; it
gradually applies compression starting earlier than THRESHOLD. Higher values produce a
smoother transition.
S Ratio
1:1, 1.5:1, 2:1,
4:1, 16:1, INF:1
Compression ratio
S Post Gain
0–+18 [dB]
Adjusts the output gain.
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl)(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)(P.199)”.