User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Effect List
187
Guitar Amp Simulator
This is an effect that simulates the sound of a guitar amplifier.
Parameter
Value
Explanation
Amp Sw
OFF, ON
Turns the amp switch on/off.
Amp Type
Type of guitar amp
JC-120
This models the sound of the Roland JC-120.
CLEAN TWIN
This models a Fender Twin Reverb.
MATCH DRIVE
This models the sound input to left input on a Matchless D/C-30.
A simulation of the latest tube amp widely used in styles from blues and rock.
BG LEAD
This models the lead sound of the MESA/Boogie combo amp.
The sound of a tube amp typical of the late ‘70s to ‘80s.
MS1959I
This models the sound input to Input I on a Marshall 1959.
This is a trebly sound suited to hard rock.
MS1959II
This models the sound input to Input II on a Marshall 1959.
MS1959I+II
This models the sound of connecting inputs I and II on a Marshall 1959 in parallel.
lt creates a sound with a stronger low end than MS1959I.
SLDN LEAD
This models a Soldano SLO-100. This is the typical sound of the eighties.
METAL 5150
This models the lead channel of a Peavey EVH5150.
METAL LEAD
This is distortion sound that is ideal for performances of heavy riffs.
OD-1
This models the sound of the BOSS OD-1.
This produces sweet, mild distortion.
OD-2 TURBO
This is the high-gain overdrive sound of the BOSS OD-2.
DISTORTION
This gives a basic, traditional distortion sound.
FUZZ
A fuzz sound with rich harmonic content.
Amp Volume
(*1)
0–127
Volume and amount of distortion of the amp
Amp Master
0–127
Volume of the entire pre-amp
Amp Gain
LOW, MIDDLE,
HIGH
Amount of pre-amp distortion
Amp Bass
0–127
Tone of the bass/mid/treble frequency range
Amp Middle
Amp Treble
Amp Presence
0–127
Tone for the ultra-high frequency range
Amp Bright
OFF, ON
Turning this “On” produces a sharper and brighter sound.
* This parameter applies to the “JC-120”, “CLEAN TWIN”, “MATCH DRIVE”, and “BG
LEAD” Pre Amp Types.
Speaker Sw
OFF, ON
Determines whether the signal passes through the speaker (ON), or not (OFF).
Speaker Type
Cabinet
Diameter (in inches) and number of the
speaker
Microphone
SMALL 1
Small open-back enclosure
10
Dynamic
SMALL 2
Small open-back enclosure
10
Dynamic
MIDDLE
Open back enclosure
12 x 1
Dynamic
JC-120
Open back enclosure
12 x 2
Dynamic
BUILT-IN 1
Open back enclosure
12 x 2
Dynamic
BUILT-IN 2
Open back enclosure
12 x 2
Condenser
BUILT-IN 3
Open back enclosure
12 x 2
Condenser
BUILT-IN 4
Open back enclosure
12 x 2
Condenser
BUILT-IN 5
Open back enclosure
12 x 2
Condenser
BG STACK1
Sealed enclosure
12 x 2
Condenser
BG STACK2
Large sealed enclosure
12 x 2
Condenser
MS STACK1
Large sealed enclosure
12 x 4
Condenser
MS STACK2
Large sealed enclosure
12 x 4
Condenser
MTL STACK
Large double stack
12 x 4
Condenser