User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Effect List
168
Modulation effects
Phaser(P.168)
Small Phaser(P.169)
Script 100(P.169)
Step Phaser(P.170)
Infinite Phaser(P.171)
Ring Modulator(P.171)
Tremolo(P.172)
Auto Pan(P.173)
Slicer(P.173)
Phaser
This is a stereo phaser. A phase-shifted sound is added to the original sound and modulated.
Parameter
Value
Explanation
Mode
4-STAGE, 8-STAGE, 12-
STAGE
Number of stages in the phaser
Manual
0–127
Center frequency at which the sound is modulated
Tempo Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Ø KIT TEMPO(P.30)
Rate (Hz)
0.05–10.00 [Hz]
Modulation rate
Rate (note)
Note
Ø Note(P.197)
Depth
0–127
Depth of modulation
Polarity
INVERSE, SYNCHRO
Selects whether the left and right phase of the modulation will be the same or the
opposite.
INVERSE: The left and right phase will be opposite.
When using a mono source, this spreads the sound.
SYNCHRO: The left and right phase will be the same.
Select this when inputting a stereo source.
Resonance
0–127
Amount of feedback
Cross
Feedback
-98–+98 [%]
Adjusts the proportion of the phaser sound that is fed back into the effect. Negative (-)
settings will invert the phase.
Mix (*1)
0–127
Level of the phase-shifted sound
Low Gain
-15–+15 [dB]
Gain of the low range
High Gain
-15–+15 [dB]
Gain of the high range
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl)(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)(P.199)”.