User manual

Table Of Contents
Effect List
164
Parameter
Value
Explanation
Tempo Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
Ø KIT TEMPO(P.30)
Rate (Hz)
0.0510.00 [Hz]
Frequency of modulation
Rate (note)
Note
Ø Note(P.197)
Depth
0–127
Depth of modulation
Attack
0–127
Speed at which the cutoff frequency will change
This is effective if Modulation Wave is SQR, SAW1, or SAW2.
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer toControlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl)(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer toControlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)(P.199)”.
Multi Mode Filter
This is a filter that is adjusted for effective use in a DJ performance.
Parameter
Value
Explanation
Filter Type
LPF/HPF, LPF, HPF,
BPF
Type of filter
LPF/HPF: The filter type is automatically switched according to the Filter Tone parameter
value.
Filter Tone
(*1)
0–255
Frequency at which the filter operates
Filter Color
0–255
Filter resonance level
Higher values more strongly emphasize the region of the operating frequency.
Filter Slope
-12, -24, -36 [dB]
Amount of attenuation per octave
-12 dB: gentle
-24 dB: steep
-36 dB: extremely steep
Filter Gain
0–+12 [dB]
Amount of boost for the filter output
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer toControlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl)(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer toControlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)(P.199)”.