User manual

Effect List
159
Mid-Side Delay
This effect applies different amounts of delay to left/right signals of similar phase and differing phase.
Parameter
Value
Explanation
M Delay Level
0–127
Delay volume of left/right input signals that are nearly (or
fully) in phase
M Delay Mode
2Tap, 3Tap, 4Tap
Delay divisions for the input signals are considerably in
phase
M Delay Time
(sync sw)
OFF, ON
If this is ON, the delay synchronizes with the tempo.
M Delay Time
(msec)
1–1300 [msec]
Adjusts the time from the original sound until the delay
sound is heard.
M Delay Time
(note)
Note
Ø Note(P.197)
M Delay 1
Feedback (*1)
-98–+98 [%]
Adjusts the proportion of the delay sound that is fed back
into the effect. Negative (-) settings will invert the phase.
M HF Damp
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which the delay sound fed
back to the effect is filtered out (BYPASS: no cut).
M Delay 1 Pan
L64–63R
Panning of the first delay sound
M Delay 2 Pan
Panning of the second delay sound
M Delay 3 Pan
Panning of the third delay sound
M Delay 4 Pan
Panning of the fourth delay sound
S Delay Level
0–127
Delay volume of left/right input signals whose signals are
considerably out of phase
S Delay Mode
2Tap, 3Tap, 4Tap
Delay divisions for the input signals whose left/right
signals are considerably out of phase
S Delay Time
(sync sw)
OFF, ON
If this is ON, the delay synchronizes with the tempo.
S Delay Time
(msec)
1–1300 [msec]
Adjusts the time from the original sound until the delay
sound is heard.
S Delay Time
(note)
Note
Ø Note(P.197)
S Delay 1
Feedback (*1)
-98–+98 [%]
Adjusts the proportion of the delay sound that is fed back
into the effect. Negative (-) settings will invert the phase.
S HF Damp
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which the delay sound fed
back to the effect is filtered out (BYPASS: no cut).
S Delay 1 Pan
L64–63R
Panning of the first delay sound
S Delay 2 Pan
Panning of the second delay sound
S Delay 3 Pan
Panning of the third delay sound
S Delay 4 Pan
Panning of the fourth delay sound
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl)(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)(P.199)”.