User manual

Effect List
155
Parameter
Value
Explanation
HF Damp
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500,
3150, 4000, 5000, 6300, 8000, BYPASS [Hz]
Adjusts the frequency above which the
delay sound fed back to the effect is
filtered out (BYPASS: no cut).
Low Gain
-15–+15 [dB]
Gain of the low range
High Gain
-15–+15 [dB]
Gain of the high range
Balance
D100:0W–D0:100W
Volume balance between the direct sound
(D) and the delay sound (W)
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl)(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)(P.199)”.
Time Ctrl Delay
A stereo delay in which the delay time can be varied smoothly.
Parameter
Value
Explanation
Tempo Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the
rhythm.
Ø KIT TEMPO(P.30)
Delay Time
(msec) (*1)
1–1300 [msec]
Delay time from when the original sound is heard to
when the delay sound is heard
Delay Time
(note) (*1)
Note
Ø Note(P.197)
Acceleration
0–15
Speed at which the current delay time changes to the
specified delay time when you change the delay time.
This affects the speed of pitch change as well as the
delay time.
Feedback
-98–+98 [%]
Adjusts the proportion of the delay sound that is fed
back into the effect. Negative (-) settings will invert the
phase.
HF Damp
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600,
2000, 2500, 3150, 4000, 5000, 6300, 8000, BYPASS
[Hz]
Adjusts the frequency above which the delay sound fed
back to the effect is filtered out (BYPASS: no cut).
Low Gain
-15–+15 [dB]
Gain of the low range
High Gain
-15–+15 [dB]
Gain of the high range
Balance
D100:0W–D0:100W
Volume balance between the direct sound (D) and the
delay sound (W)
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl)(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)(P.199)”.