User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Shortcuts for Useful Functions (TOOLS)
141
Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
Here’s how to copy the settings of a pad and to exchange the settings of two pads.
1.
On the KIT screen, press the [F5] (TOOLS) button.
This opens the TOOLS window.
2.
Use the cursor [à] [á] [ã] [â] buttons to select “COPY PAD” and press the [F6] (SELECT) button.
The COPY PAD screen appears.
3.
Use the cursor [à] [á] buttons to select a parameter, and then use the [-] [+] buttons to change the
setting.
Parameter
Value
Explanation
From
USER, USB MEMORY 1–99
Copy source kit location
USER: Copies data from user memory. You can swap (exchange) the copy source and
copy destination kits, but only if the copy source is in user memory.
USB MEMORY 1–99: Copies pads from backup data saved on a USB flash drive.
Kit number
Copy source kit number
PAD1–9, TRIG IN1–8,
FOOT SW1/2
Copy source pad number
To
Kit number
Copy/exchange destination kit number
PAD1–9, TRIG IN1–8,
FOOT SW1/2
Copy/exchange destination pad number
4.
Press the [F6] button to copy, and the [F5] button to exchange.
Button
Explanation
[F5]
(EXCHANGE)
Exchanges the pad in the “From” area with the pad in the “To” area.
[F6] (COPY)
Copies (overwrites) the pad in the “From” area to the pad in the “To” area. This erases the pad data saved in the
“To” area.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER] button.
5.
Use the cursor [ã] [â] buttons to select “OK”, and press the [ENTER] button.
After “Completed!” appears, the display returns to the previous screen.