User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
122
Configuring the Display, Screen Saver and Auto Off Function (OPTION)
1.
Select [MENU] Ó “SYSTEM”.
2.
Use the cursor [à] [á] [ã] [â] buttons to select “OPTION” and press the [ENTER] button.
The OPTION screen appears.
3.
Use the [F1]–[F3] buttons to switch between settings screens.
Button
Explanation
[F1] (LCD)
Sets the brightness of the display.
[F2] (SCRN SAVER)
Below are the parameters for configuring the screen saver.
[F3] (AUTO OFF)
Manages the power status of this unit.
4.
Use the cursor [à] [á] buttons to select a parameter, and then use the [-] [+] buttons to change the
setting.
LCD
This parameter sets the brightness of the display.
Parameter
Value
Explanation
LCD Brightness
0–15
Sets the brightness of the display.
SCRN SAVER
Below are the parameters for configuring the screen saver.
Parameter
Value
Explanation
Screen Saver Time
OFF, 1–60 min
Sets the time before the screen saver starts (in minutes).
When this is set to “OFF”, the screen saver is not used.
Screen Saver Type
TYPE1–6, USER IMAGE
Selects the type of screen saver.
Screen Saver Image No.
1–16
Selects the image number for the USER IMAGE selected in “Screen Saver Type”.
Button
Explanation
[F4] (DELETE)
Deletes the image that’s displayed as a screen saver.
This parameter is shown only when an image has been imported.
Ø Using an Image File as the Screen Saver(P.123)