User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
121
Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
BRIGHTNESS
These parameters are used for customizing the pad LED brightness and colors.
Parameter
Value
Explanation
Active Pad Brightness
0–15
Sets how bright the pad LEDs light up at maximum brightness when you strike the pads.
Inactive Pad Brightness
0–15
Adjusts the normal brightness of the pad LEDs (the LED brightness while a pad is not being
struck).
Vertical Brightness
0–15
Adjusts the brightness of the vertical indicators.
Button
Explanation
[F1] (BRIGHTNESS)
Shows the screen for setting the brightness of the pad LEDs.
[F2] (COLOR LIST)
Displays a list of colors.
You can call up a screen to edit the colors and names.
COLOR LIST
These parameters are for editing the colors and names.
The colors and names that you edit here are saved as system-wide settings.
You can also use them on the kit settings screen as shown below.
● KIT EDIT1 Ó PAD LED screen
● KIT screen Ó [F3] (PAD PROGRESS SETTING screen)
Button
Explanation
[F5] (COLOR EDIT)
Adjusts the colors that are set for the pad LEDs.
[F6] (RENAME)
Lets you name the colors that are set for the pad LEDs.