User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
118
Parameter
Value
Explanation
Direct Out Sw
ALL OFF,
ALL ON
Configures the output to the DIRECT OUT jacks. When this is set to “ALL OFF”, all output from
the DIRECT OUT jacks is disabled.
If the Master Direct Sw is set to “DIRECT”, effects are also applied to the output from the
MASTER OUT jacks. This is effective when you want to temporarily stop the sound coming
from the DIRECT OUT jacks.
AUDIO IN
Configures the AUDIO IN settings.
Parameter
Value
Explanation
Audio In Gain
-36–+12 dB
Adjusts the input level (gain) for the AUDIO IN jack.
* Note that the sound may distort if you raise the
volume too high.
Output Assign
MASTER+PHONES, PHONES-ONLY
Adjusts the output destination of the input signal
from the AUDIO IN jack.
MASTER+PHONES: Outputs to the headphones jack
and MASTER OUT jacks (when “Master Direct Sw” is
“NORMAL”).
PHONES ONLY: Outputs only to the headphones jack.
No sound is output from the MASTER OUT jacks.
Direct Out Assign
OFF, DIRECT 1–4, DIRECT 1+2–3+4 (L+R),
MASTER DIRECT L–R, MASTER DIRECT L+R
This sets the output from the DIRECT OUT 1-4 jacks
and MASTER OUT jacks (when “Master Direct Sw” is
“DIRECT”).
Noise Suppressor Sw
OFF, ON
Switches the noise suppressor on/off.
The noise suppressor is a feature that suppresses
noise during periods of silence.
Noise Suppressor Threshold
-90–0 dB
Adjusts the volume at which noise suppression starts
to be applied.
Button
Explanation
[F6] (ROUTING/METER) button
[F6] (METER/ROUTING) button
Switches between the AUDIO IN jack routing display and the level meter display.