User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
117
Configuring the Input/Output Jack Settings (AUDIO SETUP)
1.
Select [MENU] Ó “SYSTEM”.
2.
Use the cursor [à] [á] [ã] [â] buttons to select “AUDIO SETUP” and press the [ENTER] button.
The AUDIO SETUP screen appears.
3.
Use the [F1]–[F2] buttons to switch between settings screens.
Button
Explanation
[F1] (OUTPUT)
Configures the OUTPUT settings.
[F2] (AUDIO IN)
Configures the AUDIO IN settings.
4.
Use the cursor [à] [á] buttons to select a parameter, and then use the [-] [+] buttons to change the
setting.
OUTPUT
Configures the OUTPUT settings.
Parameter
Value
Explanation
Master Output Gain
-24–+12 dB
Adjusts the volume (gain) from the MASTER OUT jacks.
If the output sound from this unit is too loud and is distorted on the received end, use this
parameter to lower the volume.
* Note that the sound may distort if you raise the volume too high.
Phones Output Gain
-24–+12 dB
Adjusts the volume (gain) from the PHONES jack.
Adjust the audio output from the PHONES jack to the appropriate volume.
* Note that the sound may distort if you raise the volume too high.
Direct Output Gain
-24–+12 dB
Adjusts the volume (gain) of the DIRECT OUT jacks.
If the output sound from this unit is too loud and is distorted on the received end, use this
parameter to lower the volume.
This applies to all DIRECT OUT jacks. If the Master Direct Sw is set to “DIRECT”, effects are also
applied to the output from the MASTER OUT jacks.
* Note that the sound may distort if you raise the volume too high.
Master Direct Sw
NORMAL,
DIRECT
Selects whether the output of the MASTER OUT jacks is the same signal as the DIRECT OUT
jacks (DIRECT) or not (NORMAL).
If this is set to “DIRECT”, the output of the MASTER OUT jacks is not affected by the master
effect, master comp and master EQ, which lets you use the MASTER OUT jacks as DIRECT
OUT jacks (the setting of the [MASTER] knob applies).
This setting also applies to the USB audio output to your computer.
Master Mono Sw
STEREO,
MONO x2
Selects whether the output from the MASTER OUT jacks is in stereo (STEREO) or in mono
(MONO×2). With the MONO×2 setting, the same monophonic signal is output from both the
L and R jack.
This is useful when you’re connecting to an amp with a mono input.