User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
113
Parameter
Value
Explanation
When “Group” is
“MASTER EFFECT”
Value
Explanation
Master Effect Type
Switches the master effect type.
When “Group” is
“PAD EDIT KNOB CC”
Value
Explanation
OFF, CC1–
95
Outputs MIDI control change messages.
This is optimal for controlling DAWs or external devices
connected via MIDI.
Channel (*1)
CH1–16
Sets the channel used to output control change messages.
Controller
Explanation
Cursor [à] [á] [ã] [â] button
Selects a parameter.
[-] [+] buttons, [VALUE] knob
Edits the setting.
(*1) Enabled when “Group” is “PAD EDIT KNOB CC”.
Groups and corresponding parameters (Param)
Group
Param
Explanation
MFX1–4
MFX1–4 Switch
Switches MFX 1–4 on/off.
MFX1–4 Type
Selects MFX 1–4 types.
MFX1–4 Ctrl
Adjusts the MFX 1–4 effect intensity.
SIDE CHAIN
Side Chain Switch
Turns the side chain on/off.
SYSTEM LED
Pad Active Bright
Sets how bright the pad’s LED lights up at maximum brightness when you strike the
pad.
Pad Inactive Bright
Sets the usual brightness of the pad’s LED (how bright the LED is when the pad is not
struck).
Vertical Bright
Sets the LED brightness of the vertical indicators.
MASTER EFFECT
Master Effect Type
Selects the master effect type.
PAD EDIT KNOB CC
OFF, CC1–95
Outputs the specified MIDI control change message.
* You can also set CH 1–16.
EXP PEDAL
Parameter
Value
Explanation
Pedal Mode
(SYSTEM)
HH-CTRL,
EXP-CTRL
Switches between functions for the HH CTRL/EXPRESSION jack.
HH CTRL and EXPRESSION cannot be used at the same time.
Exp Pedal Assign
OFF,
CC01:
MODULATION,
CC02: BREATH,
CC03:,
CC04: FOOT TYPE,
CC05: PORTA TIME,
CC06: DATA ENTRY,
CC07: VOLUME,
CC08: BALANCE,
CC09:,
CC10: PANPOT,
CC11: EXPRESSION,
OFF: Use this when you don’t want to assign a function.
CC: Sets the control change number.
MASTER EFFECT CTRL: Lets you control the master effect using the expression
pedal.
(This works the same as the [MASTER EFFECT] knob.)
EXPRESSION: You can use the expression pedal to affect how the sounds play.
The Rx Control Sw settings also need to be made for the expression pedal control
destination.
Set the Rx Control Sw settings individually for each kit.
Configuring the PAD EDIT Knobs and the EXPRESSION Pedal (PAD EDIT KNOB/EXP
PEDAL)(P.75)