User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
101
Parameter
Value
Explanation
Input Mode
When a pad on
this unit is
selected: ---
When TRIG 1–8
is selected:
HEAD&RIM,
TRIGx2
Set this to connect either one drum trigger to one TRIGGER IN jack (HEAD&RIM), or two drum
triggers (TRIGx2).
Trig Type
When a pad on
this unit is
selected: ---
When TRIG 1–8
is selected: KD-
A22, KD-200,
KD-140,
KD-120, KD-85,
KD-10, KD-9,
KD-8, KD-7,
KT-10, KT-9,
PDA120L,
PDA100L, PD-
128,
PD-125X, PD-
125, PD-108,
PD-105X, PD-
105,
PD-85, PDX-
100, PDX-12,
PDX-8, PDX-6,
PD-8,
VH-11, VH-10,
CY-16R-T, CY-
15R, CY-14C-T,
CY-14C, CY-
13R, CY-12C,
CY-12R/C, CY-8,
CY-5, BT-1, BT-
1 SENS, PAD1,
PAD2, PAD3,
RT-30K, RT-
30HR, RT-
30H SN, RT-
30H TM, RT-
10K, RT-10S,
RT-10T
Specifies the model of drum trigger (trigger type) that is connected to each trigger input.
When you set a trigger type, the trigger parameters except for certain parameters (such as
crosstalk cancel) are set to the recommended values intended for onstage use. (The
“Threshold” value on the SPD-SX PRO is set higher than usual.)
These values are only general guidelines, so you can make fine-tune the settings
according to how you attach the drum triggers and how they are to be used.
Sensitivity
1.0–32.0
Use this to adjust the sensitivity of the pads, as well as the balance between how hard you
strike the pads and the volume of sound that is produced.
Increasing this value increases the sensitivity, so that even soft strikes on the pad play loudly.
Decreasing this value decreases the sensitivity, so that even strong strikes on the pad play
softly.