Specifications
MULTI-CHANNEL RECORDERSPERSONAL MIXERSDIGITAL SNAKES APPLICATIONSVIDEO PLAYERSVIDEO CONVERTERSVIDEO MIXERS/SWITCHERSAUDIO RECORDERSDIGITAL CONSOLES
6
SPECIFICATIONS
M-480
AD/DA Conversion
24-bit/48.0 kHz or 44.1 kHz
PHONES jack
Stereo 1/4 inch phone type
REAC Ports
RJ-45 EtherCon type
Dynamic Range
CONSOLE OUTPUT jacks (1 to 8): 110 dB (typ.)
Display
800 x 480 dots Wide VGA backlit TFT color screen
Power Consumption
95 W
Weight
20 kg, 44 lbs 1 oz
Nominal Input
Level (Variable)
CONSOLE INPUT jacks (1 to 8): -65 to -10 dBu (Pad: OFF)
or -45 to +10 dBu (Pad: ON), (typ.), STEREO IN jacks (L / R):
-18 to 0 dBu, TALKBACK MIC IN jack: -50 to -10 dBu
Remote Controls
RS-232C connector: 9-pin D-sub type
MIDI connectors (OUT/THRU, IN): 5-pin DIN type
Frequency Response
CONSOLE OUTPUT jacks (1 to 8): -2 dB / +0 dB (20 k ohms
load, +4 dBu, typ.)
PHONES jack: -3 dB / +0 dB (40 ohms load, 150 mW, typ.)
STEREO IN jacks (L/R)
RCA phono type
Internal processing
56 bits
USB connectors
USB Type A and Type B
Power Supply
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
Other Connectors
GND Terminal, LAMP connector XLR-4-31 type
Total Harmonic
Distortion + Noise
CONSOLE OUTPUT jacks (1 to 8): 0.05 % (+4 dBu, typ.)
PHONES jack: 0.05 % (typ., 40 ohms load, 150 mW, typ.)
Crosstalk@ 1 kHz
CONSOLE INPUT jacks (1 to 8): -80 dB (Pad: ON, Input gain:
+10 dBu, typ.), CONSOLE OUTPUT jacks (1 to 8): -100 dB (typ.)
Non Clip Maximum
Input level
CONSOLE INPUT jacks (1 to 8): +8 dBu (Pad: OFF) or +28
dBu (Pad: ON), (typ.), STEREO IN jacks (L / R): +18 dBu
(typ.), TALKBACK MIC IN jack: +8 dBu (typ.)
Output Impedance
CONSOLE OUTPUT jacks (1 to 8): 600 ohms
PHONES jack: 100 ohms
Equivalent Input
Noise Level (E.I.N.)
-126 d B u
Dimensions
749.0 (W) x 614.0 (D) x 228.5 (H) mm
29-1/2(W) x 24-11/16(D) x 9-1/16(H) inches
Non Clip Maximum
Output level
CONSOLE OUTPUT jacks (1 to 8): +22 dBu (1 kHz, 10 k ohms
load, typ.)
PHONES jack: 150 mW + 150 mW (1 kHz, 40 ohms load, typ.)
Input Impedance
CONSOLE INPUT jacks (1 to 8): 14 k ohms, STEREO IN
jacks (L / R): 10 k ohms, TALKBACK MIC IN jack: 41 K ohms
Nominal Output
Level
CONSOLE OUTPUT jacks (1 to 8): +4 dBu (Load impedance:
10 k ohms, typ.)
Recommended
Load Impedance
CONSOLE OUTPUT jacks (1 to 8): 10 k ohms or greater
PHONES jack: 8 ohms or greater
Residual Noise
Level (IHF-A, typ.)
-88 dBu (All faders: Min)
DIGITAL OUT
jacks Stereo
Optical type, Coaxial type
TALKBACK MIC IN jack
XLR-3-31 type (balanced, phantom power)
CONSOLE INPUT
jacks (1 to 8)
XLR-3-31 type (balanced, phantom power)
Network Latency
2.8 mS (typ.)
* Total System Latency of audio signal from S-1608 inputs to
outputs via M-480's REAC ports (A or B).
* Sample Rate: 48.0 kHz
* Effects : No insert effects
CONSOLE OUTPUT
jacks (1 to 8)
XLR-3-32 type (balanced)
* XLR type: 1 GND, 2 HOT, 3: COLD
* phantom power: DC +48 V(unloaded maximum), 14 mA(maximum load) (All XLR type inputs)
* LAMP power: DC +12 V/500 mA
* When a REAC Splitter&Distributor S-4000D or a switching hub is used in-line with REAC
cables, the network latency will increase by the amount of processing delay introduced
by the splitting device itself. The actual delay is dependant upon the specifications of the
splitting device, though the maximum delay amount for a single splitting device should be
about 200 microseconds.
* EtherCon is the registered trade mark of Neutric
®
M-480
M-480 Remote
Application for remotely controlling the Roland M-480 V-Mixer live mixing console.
Channels, Buses,
I/O
MIXING CHANNEL: 48 channels, 6 stereo returns
BUSES: MAIN L/C/R, 16 AUX buses, 8 MATRIX buses
INPUT: 10 ports (Max 90 ports when using REAC devices)
OUTPUT: 10 ports (Max 90 ports when using REAC devices)
NEW
Options
Wireless USB adapter
- WNA1100-RL (sold separately)
Wireless USB adapter
- WNA1100-RL (sold separately)
Wireless LAN connection Ad-Hoc connection
iPad
(M-480 Remote)
Wireless LAN
device
M-480
iPad
(M-480 Remote)M-480
Channel Strip Channel EQ Graphic EQ
Using a Wireless USB adapter, connect the M-480 to
a wireless LAN device such as a router to establish a
wireless connection with an iPad.
Connect the M-480 directly to an iPad without using
wireless devices such as a router.
WNA1100-RL
Wireless USB Adapter
The M-480 and an iPad can be connected wirelessly.
M-UF2G
2 GB USB Flash Memory
For uncompressed WAV recording/playback and
saving/loading configuration files.