Specifications

APPLICATIONSVIDEO PLAYERSVIDEO CONVERTERSVIDEO MIXERS/SWITCHERSAUDIO RECORDERSDIGITAL SNAKES MULTI-CHANNEL RECORDERSPERSONAL MIXERSDIGITAL CONSOLES DIGITAL SNAKES
15
SPECIFICATIONS
S-4000S-3208
Number of Channels
32 inputs/8 outputs
Frequency Response
-2 dB/+0 dB (@ +4 dBu, 20 Hz to 20 kHz)
Dynamic Range
110 dB
Input Impedance
20 k-ohms
Output Impedance
150-ohms
Memory
10
AC Power Supply
AC 115 V, 117 V, 220 V, 230 V, 240 V (50/60 Hz)
Phantom Power
+48 V/14 mA (each input on SI-AD4, remote controlled)
Weight
17.0 kg, 37 lbs. 8 oz.
Power Consumption
130 W
Cross Talk
-80 dB
PAD
20 dB On/Off
Nominal Output Level
+4 dBu (Max. +22 dBu)
AD/DA Conversion
24-bit/44.1 kHz, 48 kHz, 96 kHz
Total Harmonic
Distortion + Noise
0.05 % or less (Pad: On, Input Gain: +4 dBu, 22 to 20 kHz)
Nominal Input
Level
-65 to -10 dBu (PAD: Off), -45 to +10 dBu (PAD: On)
(1 dB step, Max. +28 dBu)
Network Latency
375 microseconds when using REAC cable only
(AD - REAC - DA Latency: about 1.2 ms)
Dimensions
482 (W) x 336 (D) x 266 (H) mm
19 (W) x 13-1/4 (D) x 10-1/2 (H) inches
Recommended
Load Impedance
10 k-ohms or greater
Equivalent Input
Noise Level (E.I.N.)
-128 d B
Residual Noise
Level (IHF-A, typ.)
-90 dBu
Connectors
Input: 32 (XLR type, balanced, phantom power, 4 ch input
module x 8), Output: 8 (XLR type, balanced, 4 ch output
module x 2), REAC: MAIN, BACKUP (RJ-45 EtherCon type),
Remote Connector: 1 (RS-232C, DB-9 type), MIDI
Connectors: IN, OUT (5-pin DIN type)
SPECIFICATIONS
S-4000S-0832
Number of Channels
8 inputs/32 outputs
Frequency Response
-2 dB/+0 dB (@ +4 dBu, 20 Hz to 20 kHz)
Dynamic Range
110 dB
Input Impedance
20 k-ohms
Output Impedance
150-ohms
Memory
10
AC Power Supply
AC 115 V, 117 V, 220 V, 230 V, 240 V (50/60 Hz)
Phantom Power
+48 V/14 mA (each input on SI-AD4, remote controlled)
Weight
17.0 kg, 37 lbs. 8 oz.
Power Consumption
130 W
Cross Talk
-80 dB
PAD
20 dB On/Off
Nominal Output Level
+4 dBu (Max. +22 dBu)
AD/DA Conversion
24-bit/44.1 kHz, 48 kHz, 96 kHz
Total Harmonic
Distortion + Noise
0.05 % or less (Pad: On, Input Gain: +4 dBu, 22 to 20 kHz)
Nominal Input
Level
-65 to -10 dBu (PAD: Off), -45 to +10 dBu (PAD: On)
(1 dB step, Max. +28 dBu)
Network Latency
375 microseconds when using REAC cable only
(AD - REAC - DA Latency: about 1.2 ms)
Dimensions
482 (W) x 336 (D) x 266 (H) mm
19 (W) x 13-1/4 (D) x 10-1/2 (H) inches
Recommended
Load Impedance
10 k-ohms or greater
Equivalent Input
Noise Level (E.I.N.)
-128 d B
Residual Noise
Level (IHF-A, typ.)
-90 dBu
Connectors
Input: 8 (XLR type, balanced, phantom power, 4 ch input
module x 2), Output: 32 (XLR type, balanced, 4 ch output
module x 8), REAC: MAIN, BACKUP (RJ-45 EtherCon type),
Remote Connector: 1 (RS-232C, DB-9 type), MIDI
Connectors: IN, OUT (5-pin DIN type)
SPECIFICATIONS
S-4000H
Number of Channels
8 inputs/32 outputs
Frequency Response
-2 dB/+0 dB (@ +4 dBu, 20 Hz to 20 kHz)
Dynamic Range
110 dB
Input Impedance
30 k-ohms
Output Impedance
600-ohms
Memory
10
Power Supply
AC 115 V, 117 V, 220 V, 230 V, 240 V (50/60 Hz)
Weight
9.4 kg, 20 lbs. 12 oz.
Power Consumption
70 W
Cross Talk
-80 dB
Nominal Output Level
+4 dBu (Max. +22 dBu)
AD/DA Conversion
24-bit/44.1 kHz, 48 kHz, 96 kHz
Total Harmonic
Distortion + Noise
0.05 % or less (Input Gain: +4 dBu, 22 to 20 kHz)
Nominal Input Level
+4 dBu (Max. +22 dBu)
Network Latency
375 microseconds when using REAC cable only
(AD - REAC - DA Latency: about 1.2 ms)
Dimensions
482 (W) x 387 (D) x 133 (H) mm
19 (W) x 15-1/4 (D) x 5-1/4 (H) inches
Recommended
Load Impedance
10 k-ohms or greater
Equivalent Input
Noise Level (E.I.N.)
-128 d B
Residual Noise
Level (IHF-A, typ.)
-90 dBu
Connectors
Input: 1 (DB-25 type, balanced, 8-channels),
Output: 4 (DB-25 type, balanced, 32-channels each),
REAC: MAIN, BACKUP (RJ-45 EtherCon type),
Remote Connector: 1 (RS-232C, DB-9 type),
MIDI Connectors: IN, OUT (5-pin DIN type)
SPECIFICATIONS
S-4000R
Connector
Remote Connector: 1 (RS-232C, DB-9 type)
Power Supply
Supplied from connected device.
(S-4000S, S-4000H; through the remote cable)
Weight
0.8 kg, 1 lbs. 13 oz.
Dimensions
215 (W) x 87 (D) x 55 (H) mm
8-1/2 (W) x 3-7/16 (D) x 2-3/16 (H) inches
SPECIFICATIONS
S-4000S-MR
Memory
10
Power Supply
AC 115 V, 117 V, 220 V, 230 V, 240 V (50/60 Hz)
Power Consumption
130 W
Network Latency
375 microseconds when using REAC cable only
(AD - REAC - DA Latency: about 1.2 ms)
Dimensions
482 (W) x 336 (D) x 266 (H) mm
19 (W) x 13-1/4 (D) x 10-1/2 (H) inches
Connectors
REAC: MAIN, BACKUP (RJ-45 EtherCon type),
Remote Connector: 1 (RS-232C, DB-9 type),
MIDI Connectors: IN, OUT (5-pin DIN type)
DIGITAL SNAKES
Digital Snake S-4000 series