Specifications
MULTI-CHANNEL RECORDERSPERSONAL MIXERSDIGITAL SNAKES APPLICATIONSVIDEO PLAYERSVIDEO CONVERTERSVIDEO MIXERS/SWITCHERSAUDIO RECORDERSDIGITAL CONSOLES
M-200i
SPECIFICATIONS
M200i
Processing
Connectors
Input/Output Characteristics
Channels/Buses
CHANNELS: 32
BUSES: MAIN L/R, 8 AUX, 4 MATRIX
Signal Processing
AD/DA Conversion: 24 bit
Sample Rate: 48.0 kHz or 44.1 kHz
Nominal Input
Level (Variable)
INPUT jacks (1 to 16): -65 to +4 dBu
INPUT jacks (17 to 24): -28 to +4 dBu
Input Impedance
INPUT jacks (1 to 16): 14 k-ohms
INPUT jacks (17 to 24): 10 k-ohms
Inputs/Outputs
INPUTS: 24 (64 when using optional REAC devices)
OUTPUTS: 14 (Max 54 ports when using REAC Devices)
Console Latency
2.0 mS (typ.) *1
* Total Latency of audio signal from M-200i's console inputs
to M-200i's outputs.
* Sample Rate: 48.0 kHz * Effects: No insert effects
Network Latency
2.5 mS (typ.) *1
* Total System Latency of audio signal from S-1608 inputs to
outputs via M-200i's REAC ports.
* Sample Rate: 48.0 kHz * Effects: No insert effects
Crosstalk @ 1 kHz
INPUT jacks (1 to 24): -80 dB (Input sens: +4 dBu, IHF-A, typ.)
ASSIGNABLE OUTPUT jacks (1 to 10): -88 dB (typ.)
MAIN OUTPUT jacks (L, R): -88 dB (typ.)
* Sample Rate: 48.0 kHz or 44.1 kHz
Non Clip Maximum
Input level
INPUT jacks (1 to 24): +22 dBu (1 kHz, 20 k-ohms load, typ.)
Output Impedance
ASSIGNABLE OUTPUT jacks (1 to 10): 600 ohms (typ.)
MAIN OUTPUT jacks (L, R): 600 ohms (typ.)
PHONES jack: 49 ohms (typ.)
Nominal Output
Level
ASSIGNABLE OUTPUT jacks (1 to 10):
+4 dBu (Load impedance: 10 k-ohms, typ.)
MAIN OUTPUT jacks (L, R):
+4 dBu (Load impedance: 10 k-ohms, typ.)
Dynamic Range
ASSIGNABLE OUTPUT jacks (1 to 10): 102 dB (typ.)
MAIN OUTPUT jacks (L, R): 102 dB (typ.)
* Sample Rate: 48.0 kHz or 44.1 kHz
* Input Connector: INPUT 1 to 24
(Input sens: +4 dBu, 20 Hz to 20 kHz)
Total Harmonic
Distortion + Noise
ASSIGNABLE OUTPUT jacks (1 to 10): 0.05 % (+4 dBu, typ.)
MAIN OUTPUT jacks (L, R): 0.05 % (+4 dBu, typ.)
PHONES jack: 0.05 % (40 ohms load, 150 mW, typ.)
* Sample Rate: 48.0 kHz or 44.1 kHz
* Input Connector: INPUT 1 to 24
(Input sens: +4 dBu, 20 Hz to 20 kHz)
Frequency
Response
ASSIGNABLE OUTPUT jacks (1 to 10):
-2 dB/+0 dB (20k-ohms load, +4 dBu, typ.)
MAIN OUTPUT jacks (L, R): -2 dB/+0 dB (20k-ohms load,
+4 dBu, typ.)
PHONES jack: -3 dB/+0 dB (40 ohms load, 150 mW, typ.)
* Sample Rate: 48.0 kHz or 44.1 kHz
* Input Connector: INPUT 1 to 24 (Pad: ON, Input sens:
+4 dBu, 20 Hz to 20 kHz)
Inputs/Outputs/
Others
INPUT jacks (1 to 16): XLR-3-31 type
(balanced, phantom power)
INPUT jacks (17 to 22): 1/4 inch Phone type (balanced)
INPUT jacks (23 to 24): RCA Phono type
ASSIGNABLE OUTPUT jacks (1 to 6): XLR-3-32 type
(balanced)
ASSIGNABLE OUTPUT jacks (7 to 10): 1/4 inch Phone type
(balanced)
MAIN OUTPUT jacks (L, R): XLR-3-32 type (balanced)
PHONES jacks: Stereo 1/4 inch phone type,
Miniature phone type
AES/EBU OUT jack: Optical type
REAC port: RJ-45 EtherCon type
RS-232C connector: 9-pin D-sub type
MIDI connectors (OUT/THRU, IN): 5-pin DIN type
USB MEMORY port: USB Type A
USB WLAN ADAPTOR port: USB Type A
USB COMPUTER port: USB Type B
LAN port: RJ45 type
DOC CABLE port: 10-pin mini DIN type
DC IN jack
Grounding terminal
* XLR type: 1 GND, 2 HOT, 3: COLD
* Phantom power: DC +48 V (unloaded maximum),
14 mA (maximum load, All XLR type inputs)
Others
Display
Graphic LCD 132 x 64 dots with backlight
Current Draw
3.6 A
Weight
9.8 kg, 21 lbs 10 oz
Minimum Load
Impedance
PHONES jack: 16 ohms
Accessories
DOCK CABLE, TABLET STAND, AC Adaptor,
Power Cord, Owner's Manual
Dimensions
Desktop: 491 (W) x 490 (D) x 198 (H) mm
Desktop: 19-3/8 (W) x 19-5/16 (D) x 7-13/16 (H) inches
Recommended
Load Impedance
ASSIGNABLE OUTPUT jacks (1 to 10): 10 k-ohms or greater
MAIN OUTPUT jacks (L, R): 10 k-ohms or greater
PHONES jack: 40 ohms or greater
Non Clip Maximum
Output level
ASSIGNABLE OUTPUT jacks (1 to 10):
+22 dBu (1 kHz, 10 k-ohms load, typ.)
MAIN OUTPUT jacks (1 to 10):
+22 dBu (1 kHz, 10 k-ohms load, typ.)
PHONES jack: 150 mW + 150 mW (1 kHz, 40 ohms load, typ.)
(0dBu=0.775Vrms)
*1: When a REAC Splitter S-4000D or a switching hub is used in-line with REAC cables,
the network latency will increase by the amount of processing delay introduced by the
splitting device itself. The actual delay is dependant upon the specifications of the
splitting device, though the maximum delay amount for a single splitting device should
be no more than 200 microseconds.
WNA1100-RL
Wireless USB Adapter
M-UF2G
2 GB USB Flash Memory
RA-10U
Rackmount Kit
M-200i RCS
Remote Control Software
Free download from www.rolandsystemsgroup.net
Options
197.4
490.4
Unit : mm
490.4
489.6
12