User's Manual

15
Performance
Adding Breadth to the Sound
(CHORUS/DELAY)
You can apply a chorus and delay eect to the notes you play on the
keyboard.
By adding the chorus and delay eect, you can give the sound
greater dimension, with more fatness and breadth.
1
1. Turn the [CHORUS/DELAY] knob.
The depth of the chorus/delay eect changes.
You can adjust chorus/delay depth in a range of 0–127.
MEMO
You can select the type of chorus/delay in the MENU screen 0
“SYSTEM EFFECTS” 0 “Sys Chorus” page.
NOTE
In the [MENU] 0 [SCENE EDIT] 0 [ZONE EDIT] 0 “INTERNAL”
page, if the “Cho Send (chorus send)” value is set to “0,” no chorus/
delay eect is applied. Also, depending on the settings of the Scene,
there might be cases in which turning the knob does not apply
an eect. For details, refer to “Making Detailed Settings for Tones”
(p. 23).
Modifying the Sound in Real Time
(WHEEL1/2)
By turning wheel 1 or 2 while playing the keyboard you can modify
the sound in real time. By default, wheel 1 applies a pitch bend eect
(pitch change) and wheel 2 applies a modulation eect (vibrato).
You can freely change the eects that are applied by wheels 1/2. For
details, refer to “Assigning the Function of Each Controller” (p. 20).
Adding Liveliness to the Sound
(COMPRESSOR)
Switching on the Compressor suppresses dierences in volume for a
more consistent sound.
21
1. Press the [COMPRESSOR] button, getting its
indicator to light.
Compressor will alternately turn on/o each time you press the
[COMPRESSOR] button.
2. To cancel this function, press the [COMPRESSOR]
button once more, extinguishing the indicator.
NOTE
Sounds may become distorted with certain tones.
MEMO
5 You are free to edit the compressor settings. For details, refer to
“Making Detailed Settings for Tones” (p. 23).
5 If you press the [SHIFT]+[COMPRESSOR] buttons, the compressor
settings screen appears.