Specifications

3. Assembling and Installing
17
Other Models (VS series, RS series, VP series, SP-300V/300, SP-540i/300i, RA-640, RE-640 etc.)

Attach mounting xtures B and C and secure the take-up unit to the stand.
Tighten the screws while holding the take-up unit pressed against the stand leg.
PRO II/PRO II V series, SP-540V
Mounting xture A The
left and right sides
have no handedness.
Slot
Top
Bottom
Bolts with washers
Control box
Mounting
xture A
Hex wrench
(small)
Place
pressed
against.
Place
pressed
against.
Control box
Front side of the printer
Stand leg
Frame
Stand leg
Place pressed
against.
Caster
Mounting
xture A
Mounting xture C
Frame
Hex wrench
(small)
Control box
Bolt with
washer
Small bolt
Press against
the stand leg.
Press against
the stand leg.
Mounting
xture A
Mounting
xture B
Small bolts
Hex wrench
(small)
Mounting
xture A
Mounting
xture B
Bolts with
washers
Small bolts
Hex wrench
(small)