Specifications

35
6. ECO-SOL MAX ink: Installing the Ink Cartridges
ECO-SOL MAX ink: Filling with Ink for the First Time
On ECO-SOL MAX ink models, special procedures are required when installing ink cartridges for the rst time. These are
required only once, when installing ink cartridges for the rst time after shipment from the factory.
You rst clean the print heads using cleaning uid, then ll with the inks of the various colors. This operation requires two
SOL INK cleaning cartridges.
Never under any circumstances use anything other than the specied type of ink or cleaning uid.
ECO-SOL MAX ink: Installing the Ink Cartridges
For AQUEOUS PIGMENT ink models  P. 32
During cleaning, you insert and remove cartridges several times. The on-screen messages indicate which to insert and remove,
and when to insert and remove them.
Insert each color ink cartridge into the slot labeled with the matching color. The cleaning cartridges are not dierentiated
by color.
CAUTION
Never insert your hand or ngers into the opening of the front cover.
The print heads move at high speed inside the cover. Contact may cause injury.
1 2 3 4
Slot number
 Keep the labeled side face up.
 Insert and remove slowly, one at a time.
 Insert rmly, as far as it will go.
 Insert rmly until you hear a beep.
Be sure to follow the on-screen instructions
for insertion and removal.