Specifications

32
5. AQUEOUS PIGMENT ink (FPG2): Installing the Ink Cartridges
Afxing the Label for AQUEOUS PIGMENT ink (FPG2) Models
Ax the label for AQUEOUS PIGMENT ink models so that it covers the label for ECO-SOL MAX ink models at the location
shown in the gure.
AQUEOUS PIGMENT ink (FPG2):Installing the Ink Cartridges
Never under any circumstances use anything other than the specied type of ink or cleaning uid.
For ECO-SOL MAX ink models  P. 35
CAUTION
Never insert your hand or ngers into the opening of the front cover.
The print heads move at high speed inside the cover. Contact may cause injury.
1. Start up in the AQUEOUS PIGMENT ink mode.

Close the front cover.
Important!: The Ink Mode When Using AQUEOUS PIGMENT ink (FPG2)
If you're using AQUEOUS PIGMENT ink (FPG2) ink, then when you switch on the power for the rst time
after purchase, you must start the machine in the AQUEOUS PIGMENT ink mode. This operation can be
performed only when switching on the power for the rst time. Give careful attention to this matter,
because failing to carry out this important operation makes the machine unable to use AQUEOUS PIG-
MENT ink (FPG2).
Label for AQUEOUS PIGMENT ink models
Label for ECO-SOL MAX ink models
Ink cartridge slot