Specifications

3. Assembling and Installing
Assembling the Stand
First assemble the stand, then mount the machine on top of the stand.
CAUTION
Unpacking and installation must be carried out by six persons or more.
Otherwise the machine or the stand may fall, resulting in injury.
Procedure

Attach the casters onto the stand leg.
The stand leg has no particular up or down orientation. Tighten the bolts securely. Loose bolts may cause the stand
to wobble.

Set the stand upright and attach the arms.
Be sure to attach rst the lower bolts , then the upper bolts , and lastly the side bolts .
Attaching the upper bolts rst may make it impossible to attach the lower bolts.
Bolts
3 pcs.
Bolts
3 pcs.
Bolt secured
in place from
underneath
Bolts (two each on left and right)
Attach rst.
Hexagonal wrench
Arm (left)
Arm (right)
Bolt
Bolt
Bolt secured
in place from
underneath
Pipe
Hexagonal wrench Short
Long
Bolts
3 pcs.
Bolts
3 pcs.
Bolt
Bolt
Bolt secured
in place from
underneath
Bolt secured
in place from
underneath
Casters
Stand leg
23