Setup guide

35
6. ECO-SOL MAX ink model: Installing the Ink Cartridges
Filling with Ink for the First Time
Special procedures are required in installing ink cartridges for the rst time. These procedures are required
only once when ink cartridges are installed for the rst time after shipment from the factory. You rst need to
clean the print heads using cleaning uid and then ll with the inks of the respective colors. This operation
requires two SOL INK cleaning cartridges and six dummy cartridges.
*For SOL INK cartridges and ink cartridges, be sure to use new ones.
*Never, under any circumstances, use anything other than the specied type of ink or cleaning uid.
Sticking of ECO-SOL MAX ink model label
Stick the ECO-SOL MAX ink model label on the water-based pigment ink (FPG) model label stuck at the loca-
tion indicated in Fig.
ECO-SOL MAX ink model label
Water-based pigment ink (FPG)
model label