Setup guide

30
5. Water-based pigment ink (FPG) model: Installing the Ink Cartridges
Water-based pigment ink (FPG) model: Installing the Ink Cartridges
1. Switch on the power and make the initial settings.

Close the front cover.

Switch on the main power switch.
SET CARTRIDGE
1 2 3 4 5 6 7 8
Be sure to follow the on-screen instructions
for insertion.
 Insert slowly, one at a time.
 Insert rmly, as far as it will go.
 Insert the cartridge straight down from the top.
Slot number
Label
surface