User Manual

Getting Ready

1. Turning the Power On/O

Types of batteries that can be used

• Alkaline battery (AA, LR6)

• Rechargeable Ni-MH battery (AA, HR6)

NOTE

The R-07 itself is not able to recharge rechargeable Ni-MH

batteries. You’ll need to use a battery charger designed for

rechargeable Ni-MH batteries.

1. Make sure that the power is o.

If the power is on, turn it o. Slide the R-07’s [POWER] switch toward

POWER to turn the power on/o.

2. Open the cover of the battery compartment located on

the bottom of the unit.

Turn the R-07 over, then slide the cover downward while pressing

the area circled in the illustration.

* When turning the unit over, be careful so as to protect the buttons

and knobs from damage. Also, handle the unit carefully; do not

drop it.

3. Install the batteries.

Install two AA batteries in the compartment, making sure that the

polarity (+/– orientation) is correct.

4. Close the cover of the battery compartment.

5. Slide the [POWER] switch toward POWER for several

seconds; the power will turn on.

When the power turns on, a screen like the following will appear in

the display. We’ll call this the “main screen.”

6. To turn the power o, slide the [POWER] switch once

again toward POWER for several seconds.