User Manual

Playback / Using the Recorded Data

Playing Back Recordings with R-07

1. Access the main screen.

2. Use [

]/[ ] to select the le that you want to play.

MEMO

If the display indicates “No Song,” the current folder contains no

les that the R-07 can play back.

If the display indicates “No Card,” no microSD card has been

inserted.

3. Press [ ] to play the le.

The REC/PLAY indicator will light green.

During playback, you can hold down [

] to rewind, or [ ] to

fast-forward. Normal playback will resume when you release the

button.

NOTE

For some types of microSD card, the data reading speed may

not keep up when rewinding or fastforwarding during playback,

causing the rewind or fast-forward operation to stop.

If this occurs, press [

] to stop playback. Then play back once

again.

4. Use VOL [+] [–] to adjust the volume.

5. Press [

] to stop playback.

The REC/PLAY indicator will go out.

Using Recordings with a Computer

Use a commercially available USB cable to connect the R-07 to your

computer, and transfer the recorded les to the computer.

* For details on transferring les to your computer, refer to the

reference guide (PDF).

Recorded les can be used with music production DAW software or

video editing software on your computer. For details on the formats

that can be imported, and the import procedure, refer to the

owner’s manual of your software.

Creating an Audio CD

By using a device that is able to create audio CDs, such as the

Roland CD-2 series, you can create an audio CD from les that were

recorded on the R-07. For more about the CD-2 series, refer to the

Roland website.

* If you intend to create an audio CD, set Sample Rate to 44.1 kHz and

REC Mode to WAV-16 bit. Using the scene setting “MUSIC CD” is a

convenient way to make these settings (p. 12).