User`s manual

21
PNC-960 PNC-910
Mechanism Media-movement method
Driving method Stepping motor (Micro-step)
Maximum cutting area Width:584 mm (23")
Length:24,998 mm (984-1/8")
Width:280 mm (11")
Length:24,998 mm (984-1/8")
Acceptable media widths 50 mm—711 mm (1-15/16"—28") 50 mm—406 mm (1-15/16"—16")
Acceptable paper widths 50 mm—711 mm (1-15/16"—28") 50 mm—406 mm (1-15/16"—16")
Acceptable paper types High-quality paper
Tools Cutters: Special cutter for CAMM-1 series
Pens: Water-based fiber-tipped pens, Thick water-based fiber-tipped pens (options) and
32 color plotter pens (options)
Max. cutting speed During cutting: 400 mm/sec.
(When DIP switch SW-8 is at ON:100 mm/sec.)
Blade force 30 gf—200 gf
Mechanical resolution 0.05 mm/step
Software resolution 0.025 mm/step
Distance accuracy Error of less than +/- 0.2% of distance travelled, or 0.1mm, whichever is grater
Repetition accuracy 0.1 mm or less (Excluding stretching/contraction of the sheet, and provided that sheet length is under
1600 mm (63"))
Interface Parallel (Centronics compatible), Serial (RS-232C)
Buffer size 2 Kbytes (expandable up to 2 Mbytes)
Instruction system CAMM-GLIII (mode1 and mode2)
Switches Power switch, Pen force slider, DIP switches
Control switches
LED POWER/ERROR LED, SETUP LED, PAUSE LED, PEN MODE LED, ROTATE LED,
TEST LED
Power consumption 0.6 A /117 V, 0.35 A / 220 - 230 V, 0.35 A / 230 - 240 V
Acoustic noise level [Cutting mode]:less than 68 dB (A)
[Standby mode]:less than 40 dB (A)
(According to ISO 7779)
[Cutting mode]:less than 65 dB (A)
[Standby mode]:less than 40 dB (A)
(According to ISO 7779)
Dimensions 840 mm (W) x 278 mm (D) x 221 mm (H)
(33-1/8" (W) x 11" (D) x 8-3/4" (H))
535 mm (W) x 278 mm (D) x 221 mm (H)
(21-1/8" (W) x 11" (D) x 8-3/4" (H))
Weight 16 kg (35.3 lb.) 10 kg (22 lb.)
Operating temperature 5—40°C (41—104°F)
Operating humidity 35%—80% (non-condensing)
Accessories Power Cord x 1, Blade (ZEC-1005) x 1, Blade Holder (XD-CH3) x 1, Test-use High-quality Paper x 1,
Material for Test Cuts x 1, Test-use Application Tape x 1, Test-use Water-based Fiber-tipped Pen x 1,
User's Manual x 1, CAMM-1 DRIVER for windows 95 x 1,
CAMM-1 DRIVER for windows 3.1 x 1
* Roller base x 1, * Cutter Tool x 1, * Tweezers x 1,
*.....PNC-960 only
9 Specifications
SETUP, PAUSE, PEN MODE, ROTATE, TEST, ORIGIN SET, , , ,
9 Specifications