User`s manual

Cancels scanning/Pauses scanning

Rescanning a particular portion

After you’ve scanned an object, you can rescan a particular portion of the object.

After performing coarse scanning for the entire object, respecifying only an included portion and performing fine scanning can shorten

the scanning time.

However, if the scan object has been moved or removed from the table, or if the power to the PIX-30 has been switched off and back on,

then you cannot scan the same portion.

Click , and from the scanning data

shown on the screen, select a portion to rescan.

You can specify a number of noncontinuous

portions.

Click on the Dr. PICZA. The Control-

ler window opens.

Cancels scanning.

Any data scanned

before being canceled

remains in memory.

Scanning pauses and

the sensor moves to

the VIEW position

(the inner-right area).

Click [VIEW] again to

resume scanning.

Specify area for rescanning

Make the setting for scanning conditions.

Click [SCAN].

Rescanning of the specified portion starts.

Results of rescanning