User`s manual

34
"It is likely that the scanning time will greatly exceed the estimate. To make the actual time match the
estimated time more closely, clear the selection for showing data during scanning. Do you want to scan with
[Preferences] - [Show data during scanning] turned off?"
The time required to display an object on screen is the main cause of differences between estimated and actual
times.
To switch off the display of data while scanning is in progress, click [Yes]. Doing this clears the selection for
[Show data during scanning] in the [Preferences] dialog box.
To display data while scanning, click [No].
To keep this message from appearing again, select [Do not show this message again]. (The setting for [Do not
show this message again] is not saved, and it returns to the default setting when you restart Dr. PICZA.)
"Could not detect scan object."
An object that cannot be scanned is mounted on the scanner, or no object is mounted.
For more information about objects that cannot be scanned, refer to the user's manual for the 3D scanner.
If no object to be scanned is mounted on the scanner, then mount a scan object.
5-3 Other symptoms
The [Settings for Scanning] dialog box display is garbled.
Upgrading to the latest version of the display driver may correct this problem.