User`s manual

26
4-4 [View] menu
[View] - [Top] command
This displays the object drawn in the XY plane using the perspective projection method.
The view is expanded or reduced in size to fill the screen.
Because the orientation of the coordinate axis may vary according to the 3D scanner, this may not produce a
figure as seen from above in actual space.
[View] - [Front] command
This displays the object drawn in the XZ plane using the perspective projection method.
The view is expanded or reduced in size to fill the screen.
Because the orientation of the coordinate axis may vary according to the 3D scanner, this may not produce a
figure as seen from front in actual space.
[View] - [Fit to Screen] command
This command expands or reduces the size of the object shown to fill the screen.
Toolbar button:
[View] - [Coordinates and Distances...] command
This command toggles display of the [Coordinates and Distances] window on or off.
Display the [Coordinates and Distances] window to find out the coordinates of a point or the distance between two
points.
Toolbar button: