User`s manual

17
[Settings for Scanning] dialog box - Rotary Scanning
This shows the displayed scanning area as a three-dimensional solid or as a plane.
This rotates the displayed scanning area by five degrees in the direction of the arrow.
Preview
This performs a rough scan of the shape of the scan object and adds a view of the scanning area.
Circumferential
Enter the circumferential scanning area.
To limit the scanning area, enter the scan-start (first) and scan-end (last) angles, referenced to 0 degrees.
The orientation of 0 degrees differs according to the model of 3D scanner.
To perform scanning over the entire direction without limiting the angle, enter from 0 to 360.
Height
Enter the scanning area in the height direction.