User`s manual

13
About Help
If you're unsure how perform an operation while you're working, taking a look at Help
can find the answer. If you're using Dr. PICZA for the first time, please be sure to read
the Help screens. You can call up Help from the software menus.
6 Selecting a communication port
Press the File button and select [Preferences...].1 Select the port where the cable is connected, then click
[OK].
2
Click either one or the other
7 Powering ON
Before switching on the power to the PIX-3, turn on the computer.
Press the STANDBY key.
The STANDBY LED lights up.
1
The unit performs its initialization routine, then stops.
(During initialization, the sound of the moving table
and Z unit may be somewhat loud. This is not a
defect.)
2
When the unit is in its initialized state immediately
switching on the power, an error may be displayed if
some object touches the sensor. (When an error has
occurred, the STANDBY LED intermittently flashes
twice.)
If this happens, switch off the power, remove the object
touching the sensor, then switch the power back on.