Specifications
50
Part 5 Many Kinds of Printing and Settings
5.1 Many Kinds of Printing
Part 5 Many Kinds of Printing
and Settings
With the PC-12, you can perform printing using a wide variety of print modes and printing methods depending on the type of document to
print, the type of media used, and the ink-ribbon cartridges.
You make these settings at the [Roland PC-12] dialog box. For information on how to display the [Roland PC-12] dialog box, see "4.2 Output
from a Compatible Program."
For the media loaded on the PC-12 and the ink-ribbon cartridges installed in the PC-12, be sure to use the same items
described in the setting in the [Roland PC-12] dialog box.
This section describes what printing methods are available and what settings, conditions, and other requirements are necessary to execute
them.
To set the printing method, go to the [Roland PC-12] dialog box and use the [Print Settings] page.
[Output Data]
[Document Type]
[Media Type]
[Print Mode]
[Print Using]
[Select Ink Cartridge(s)]
Settings on the [Print Settings] page
How to read the lists of setting items in "Many Kinds of Printing"
* When more than one choice is given for a setting item, you can select and one of them.
* Depending on the setting items you choose, the availability of other setting-item selections may change.
* Required settings and conditions are indicated by
(shading).
- When you print small shapes or text on wax-use media using special-color, gold, or silver ribbon, the printed results
may be faint. In some cases this can be improved by enlarging the line width of the shapes or the size of the text.
- When you perform printing on resin-use media using special-color, red, or blue ribbon, then depending on
themedia, faint colors may become visible in areas that are supposed to be unprinted, due to slight dragging of the
printing heads.
NOTICE