Specifications

20
Returning Settings to Their Factory Defaults
You can restore the memories (1–4), pedal mode settings, and the MEMORY
Number Indication to their original factory values.
Carrying out the following procedure completely clears the content
currently stored in the memories (1–4).
1. Switch off the power.
• When running on battery power:
Disconnect the connection plug from the INPUT jack.
• When running on power from an AC adaptor:
Disconnect the plug from the AC ADAPTOR jack.
2. While holding down the WRITE button, switch on the power.
• When running on battery power:
Insert the connection plug into the INPUT jack.
• When running on power from an AC adaptor:
Insert the AC adaptor plug into the AC ADAPTOR jack.
When you release the button, the MEMORY Number indicators blink.
3. Press the MEMORY WRITE button.
After the MEMORY Number indicators begin blinking rapidly, the setting is stored
in memory and the unit returns to its ordinary state.
* To cancel the setting change, operate the EFFECT ON/OFF pedal or the MANUAL/
MEMORY pedal before pressing the MEMORY WRITE button. The unit will return to
its ordinary state.
Memory
Settings
Memory 1 (p. 23) LOUD
Memory 2 (p. 24) LEAD
Memory 3 (p. 24) OD-1
Memory 4 (p. 24) STACK
Pedal Mode (p. 7) 1
(MANUAL → MEMORY 1 → MEMORY 2 →
MEMORY 3 → MEMORY 4 → MANUAL)
MEMORY Number
Indication (p. 19)
Lighting Pattern 1
(Only the indicator for the selected memory lights up.)