Specifications

Quickstart to Roland MDX-40 and Modela Player 4
86
Copyright © Freeform Digital
Example 4
Step 5
In the Depth tag, the Preview - displays the
cutting-depth locations.
It lets you check the depths to which the model
is cut.
To change the depth, drag the red line up or
down.
You can also rotate, move, or zoom the view, or
t it to the screen.
Depth - the cutting depth from the circle
circumscribed around the model. Negative
values cannot be entered.
This determines the approach limit for the tool.
Note that making the depth greater than the
thickness of the workpiece may cause the model
to be cutoff during cutting.
This cannot be set deeper than the centre of
rotation.
When the workpiece is secured in place using a
core rod, the depth is limited to keep the core
rod from being cut.
Set Depth for model
Zoom tool
Move tool
You can zoom and move using the tools below the
Preview screen.
Enter Depth = 10 mm. You should see a circle
depicting the depth of the cutting in the Preview.
Selection tool