Specifications

Quickstart to Roland MDX-40 and Modela Player 4
8
Copyright © Freeform Digital
Example 1
Material Mounting
First thing to do on Roland MDX40
machine is to mount a base material
on the work area -- the squarish
orange board with 8 holes.
The reason is to protect this working
area and to reduce wear and tear on
the machine over time.
Find a rm and at material such as hard
wood to mount onto the working area.
Take sometime to measure and centre the
mounting material if necessary. But you
can place the mounting anywhere within
the work area, wherever you decide.
Take reference from the photo shown on
the left.
Place the actual material you have
decided for the cutting to be mounted
on top of the rst layer of material. In
this case, a chemical wood material has
been suggested here. You can easily
decide this on your own.
Step 1
Step 2
Position protection base
Position material