Specifications

Quickstart to Roland MDX-40 and Modela Player 4
76
Copyright © Freeform Digital
Example 3
Step 26
Step 27
Step 28
Define Finishing on model
Click on New Process icon to bring up
this dialog box. Choose Index cutting
and Finishing.
Click NEXT.
Define angle of cut
Specify an angle of 180 degrees.
Click NEXT.
Step 29
Choose tool diameter
Select R1.5 ball mill from the tool
drop-down list.
Click NEXT.
Set cutting area & depth
Select Partial option to allow manual input of
values.
Change preview by clicking on Change Depth icon.
Enter Start Height = 12.03 mm and
End Height = -1 mm.
Click NEXT.