Specifications

Quickstart to Roland MDX-40 and Modela Player 4
75
Copyright © Freeform Digital
Example 3
Step 22
Step 23
Step 24
Step 25
Set cutting area & depth
Select Partial option to allow manual inputs of values.
Change preview by clicking on Change Depth icon. Enter
Start Height = 12.03 mm and End Height = -1 mm.
Click NEXT.
Set type of tool path
For creating type of tool path, choose Contour
Lines. From the drop-down, select Up Cut.
Click NEXT.
Enter the values as shown on the left,
overwriting the defaults.
Set cutting parameters
Save the process as Roughing2 and
create tool path later.
Click Finish to close.
Save Roughing process
15000
2